Fortinet Document Library

Version:


Table of Contents

6.3.7
Download PDF
Copy Link

Configuring the Second vNIC on the FortiWeb

  1. After attaching the second vNIC to the FortiWeb, ensure you reboot, then log into the FortiWeb. Log into the GUI console and navigate to Network > Interfaces. You now see two ports, but the second port is not configured with an IP address. Manually configure the same IP address specified on OCI.
  2. Select port2, then click Edit. Manually enter the IP address and netmask. Allow administrative access to PING, SSH, and so on as desired. Click OK.
  3. You now have two network interfaces configured.


Configuring the Second vNIC on the FortiWeb

  1. After attaching the second vNIC to the FortiWeb, ensure you reboot, then log into the FortiWeb. Log into the GUI console and navigate to Network > Interfaces. You now see two ports, but the second port is not configured with an IP address. Manually configure the same IP address specified on OCI.
  2. Select port2, then click Edit. Manually enter the IP address and netmask. Allow administrative access to PING, SSH, and so on as desired. Click OK.
  3. You now have two network interfaces configured.