system raid
Use this command to configure the RAID level.
Currently, only RAID level 1 is supported, and only on the following models shipped with FortiWeb 4.0 MR1 or later:
- FortiWeb-1000B
- FortiWeb-1000C
- FortiWeb-1000D
- FortiWeb-1000E
- FortiWeb-2000E
- FortiWeb-3000C
- FortiWeb-3000D
- FortiWeb-3000E
- FortiWeb-4000C
- FortiWeb-4000D
- FortiWeb-4000E
On older appliances that have been upgraded to FortiWeb 4.0 MR1 or later, RAID cannot be activated.
|
Back up the data regularly. RAID is not a substitute for regular backups. RAID 1 (mirroring) is designed to improve hardware fault tolerance, but cannot negate all risks. |
To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For details, see Permissions.
Syntax
config system raid
set level {raid1}
end
| Variable | Description | Default |
| Enter the RAID level. Currently, only RAID level 1 is supported. |
raid1
|
Example
This example sets RAID level 1.
config system raid
set level raid1
end