create-raid level
Use the this command to initialize the RAID.
Currently, only RAID level 1 is supported, and only on FortiWeb 1000B/C/D/E, 2000E, 3000C/CFsx, 3000E, and 4000E shipped with FortiWeb 4.0 MR1 or later.
On older appliances that have been upgraded to FortiWeb 4.0 MR1, RAID cannot be activated.
|
Back up any data before initializing the array. Back up the data regularly. RAID is not a substitute for regular backups. RAID 1 (mirroring) is designed to improve hardware fault tolerance, but cannot negate all risks. |
To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For details, see Permissions.
Syntax
execute create-raid level {raid1}
| Variable | Description | Default |
| Enter the RAID level. Currently, only RAID level 1 is supported. |
raid1
|