For hypervisor deployments, after the virtual appliance is powered on, you log in to the FortiWeb-VM command line interface (CLI) via the console and configure basic network settings so that you can connect to the appliance’s web UI, CLI, or both through your management computer’s network connection.
- On your management computer, start the following according to the VM environment in which you have deployed FortiWeb-VM:
- Hyper-V Manager
On Hyper-V Manager:
- Under Virtual Machines, right-click the name of the virtual appliance, such as FortiWeb-VM.
- Click Connect.
port1, or whichever network interface maps to the network physically connected to your management computer. Type:
config system interface
set ip <address_ip> <netmask_ip>
<address_ip>is the IPv4 or IPv6 address assigned to the network interface, such as
192.168.1.99; the correct IP will vary by your configuration of the vNetwork (see Mapping the virtual NICs (vNICs) to physical NICs)
<netmask_ip>is its netmask in dotted decimal format, such as
255.255.255.0(alternatively, append a CIDR-style subnet such as /24 to the IP)
config system dns
set primary <dns_ip>
set secondary <dns_ip>
config router static
set gateway <router_ip>
set device port1
You should now be able to connect via the network from your management computer to
port1 of FortiWeb-VM using:
- a web browser for the web UI (e.g. If
port1has the IP address 192.168.1.1, go to https://192.168.1.1/)
- an SSH client for the CLI (e.g. If
port1has the IP address 192.168.1.1, connect to 192.168.1.1 on port 22.)
|When connecting to the web UI via HTTPS, if you cannot get a connection, verify that your computer’s time zone matches the appliance’s configured system time. For more first-time connection troubleshooting, or instructions on how to configure the time and time zone, see the FortiWeb Administration Guide.|
If you are using the 15-day free trial license and do not yet have a paid license file, you can continue instead with What’s next?.
When the 15-day free trial license expires, you will not be able to perform any actions in the web UI until a license has been uploaded. After a valid license has been uploaded, the web UI and the CLI will be unlocked and fully functional.
The trial period begins the first time you power on your FortiWeb-VM virtual appliance. You can upgrade the trial license to a purchased one at any time during or after the trial period by uploading the license file via the License Information widget in the dashboard of the web UI. For instructions, see Uploading the license.