Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

system ha status

Use this command to display the HA group ID, as well as the serial number, role (active or standby), and device priority of each appliance belonging to the HA cluster.

To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For details, see Permissions.

Syntax

diagnose system ha status

Example

This example lists the HA group ID, serial numbers, and device priorities.

diagnose system ha status

Below is a sample output.

HA information

 

Model=FV-1KD-5.30-FW-build0431, Mode=a-p Group=2

 

HA group member information: is_manage_master=1.

FV-1KD3A13800012, Master, 4, 0, 196417

FV-1KD3A13800091, Slave, 6, 0, 185787

In this example, in the information for FV-1KD3A13800012, 4 is the priority of the appliance and 0 is the number of ports that have been down.

If the value of the priority or ports down is 100, the parameter is “invalid.” For example, if the appliance has not yet joined the HA cluster.

Related topics

system ha status

Use this command to display the HA group ID, as well as the serial number, role (active or standby), and device priority of each appliance belonging to the HA cluster.

To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For details, see Permissions.

Syntax

diagnose system ha status

Example

This example lists the HA group ID, serial numbers, and device priorities.

diagnose system ha status

Below is a sample output.

HA information

 

Model=FV-1KD-5.30-FW-build0431, Mode=a-p Group=2

 

HA group member information: is_manage_master=1.

FV-1KD3A13800012, Master, 4, 0, 196417

FV-1KD3A13800091, Slave, 6, 0, 185787

In this example, in the information for FV-1KD3A13800012, 4 is the priority of the appliance and 0 is the number of ports that have been down.

If the value of the priority or ports down is 100, the parameter is “invalid.” For example, if the appliance has not yet joined the HA cluster.

Related topics