create-raid rebuild
Use the this command to rebuild the RAID.
Currently, only RAID level 1 is supported, and only on FortiWeb-1000B, 1000C, 3000C/CFsx, 3000E, and 4000E shipped with FortiWeb 4.0 MR1 or later.
On older appliances that have been upgraded to FortiWeb 4.0 MR1, RAID cannot be activated.
|
Back up the data regularly. RAID is not a substitute for regular backups. RAID 1 (mirroring) is designed to improve hardware fault tolerance, but cannot negate all risks. Rebuilding the array due to disk failure may result in some loss of packet log data. |
To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For details, see Permissions.
Syntax
execute create-raid rebuild
Example
This example rebuilds the RAID array.
execute create-raid rebuild
The CLI displays the following:
This operation will clear all data on disk :0!
Do you want to continue? (y/n)
After you enter y (yes), the CLI displays additional messages.
