Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

system raid

Use this command to configure the RAID level.

Currently, only RAID level 1 is supported, and only on the following models shipped with FortiWeb 4.0 MR1 or later:

  • FortiWeb-1000B
  • FortiWeb-1000C
  • FortiWeb-1000D
  • FortiWeb-1000E
  • FortiWeb-2000E
  • FortiWeb-3000C
  • FortiWeb-3000D
  • FortiWeb-3000E
  • FortiWeb-4000C
  • FortiWeb-4000D
  • FortiWeb-4000E

On older appliances that have been upgraded to FortiWeb 4.0 MR1 or later, RAID cannot be activated.

Back up the data regularly. RAID is not a substitute for regular backups. RAID 1 (mirroring) is designed to improve hardware fault tolerance, but cannot negate all risks.

To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For details, see Permissions.

Syntax

config system raid

set level {raid1}

end

Variable Description Default

level {raid1}

Enter the RAID level. Currently, only RAID level 1 is supported. raid1

Example

This example sets RAID level 1.

config system raid

set level raid1

end

Related topics

system raid

Use this command to configure the RAID level.

Currently, only RAID level 1 is supported, and only on the following models shipped with FortiWeb 4.0 MR1 or later:

  • FortiWeb-1000B
  • FortiWeb-1000C
  • FortiWeb-1000D
  • FortiWeb-1000E
  • FortiWeb-2000E
  • FortiWeb-3000C
  • FortiWeb-3000D
  • FortiWeb-3000E
  • FortiWeb-4000C
  • FortiWeb-4000D
  • FortiWeb-4000E

On older appliances that have been upgraded to FortiWeb 4.0 MR1 or later, RAID cannot be activated.

Back up the data regularly. RAID is not a substitute for regular backups. RAID 1 (mirroring) is designed to improve hardware fault tolerance, but cannot negate all risks.

To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For details, see Permissions.

Syntax

config system raid

set level {raid1}

end

Variable Description Default

level {raid1}

Enter the RAID level. Currently, only RAID level 1 is supported. raid1

Example

This example sets RAID level 1.

config system raid

set level raid1

end

Related topics