Working with FortiVoice profiles

The Phone System > Profile tab lets you create user privileges and SIP profiles for configuring extensions and SIP trunks. It also allows you to modify caller IDs, schedule the FortiVoice unit, and configure phone profiles.

This topic includes:

Configuring SIP profiles
Modifying caller IDs
Configuring phone profiles
Configuring programmable keys profiles
Configuring RADIUS authentication profiles
Configuring user privileges
Configuring emergency zone profiles
Scheduling the FortiVoice unit

Configuring SIP profiles

Configure the common SIP settings that can be applied to every SIP trunk and SIP device in your network.

Communicate with your VoIP service provider because the profile settings are subject to the capabilities of the VoIP service provider. For example, if some of your features and codecs are not supported by your VoIP service provider, they will not work even if they are enabled or selected in the SIP profile.

The default SIP profiles can be edited but cannot be deleted.

For information on extensions, see Configuring extensions.

For information on SIP trunks, see Configuring trunks.

To configure a SIP profile

Go to Phone System > Profile > SIP and click New.
Select the SIP profile type.

Configure the following:

GUI field	Description
Name	Enter a name for this profile.
DTMF	Select the dual-tone multi-frequency (DTMF) method used by the VoIP provider. Options are RFC2833, Inband, and Info.
Keep alive	Enter the time interval in seconds for the FortiVoice unit to talk to the SIP server of your service provider to keep the connectivity and check its capability. 0 means no checking by the FortiVoice unit.
NAT	Select if the VoIP service provider supports SIP NAT translation.
T.38	Select if the VoIP service provider supports fax over VoIP network. This option is not available for every profile type.
Transport	Transport: SIP commonly uses TCP or UDP port 5060 and/or 5061. Port 5060 is used for non-encrypted SIP signaling sessions and port 5061 is typically used for SIP sessions encrypted with Transport Layer Security (TLS). Enable the protocols as required. This option, if applied to a user, overrides the system-wide transport settings. For more information, see Configuring SIP settings. Secure RTP: Select to provide encryption, message authentication and integrity, and replay protection to the FortiVoice Real-time Transport Protocol data. This option is not available for every profile type.
Codec	Select the codecs supported by the VoIP service provider. Among the selected ones, choose the preferred one for the VoIP provider. The preferred codec is usually the most used one in your area and provides the best quality of communication. If your preferred codec is different from that of your VoIP service provider, the service provider’s codec will be used as long as it is one of your supported codecs.

Click Create.

Modifying caller IDs

You can change the phone number, caller’s name, or both that will appear on the destination phone.

Caller ID modifications are used when configuring dial plans. For more information, see Configuring call routing.

To modify a caller ID

Go to Phone System > Profile > Caller ID Modification.

Click New and configure the following:

GUI field	Description
Name	Enter the name for this caller ID modification record.
Match number	Enter the extension number or number pattern you want to modify. For example, you can enter 8134 to modify a single extension, or 81xx to modify all the four-digit numbers starting with 81.
Number Modification	If you have entered a number or number pattern in Match number field, configure the following values to modify it: Strip: Enter a number to hide the starting part of an extension from displaying. 0 means no action. For example, if your Match number is 8134 and Strip is 2, only 34 will be displayed as caller ID. Truncate: Enter a number to hide the ending part of an extension from displaying. 0 means no action. For example, if your Match number is 8134 and Truncate is 2, only 81 will be displayed as caller ID. Prefix: Add a number before an extension. For example, if your Match number is 8134 and Prefix is 5, the caller ID will be 58134. Postfix: Add a number after an extension. For example, if your Match number is 8134 and Postfix is 5, the caller ID will be 81345.
Match option	Select the way to match a call with caller name and number in order to modify call number or caller ID. Match Number or Name: If the number is matched, modifications will be done based on Number Modification configuration. If the name is matched, modifications will be done based on Map to new caller ID name configuration. Match Number then Name: If the number is matched, modifications will be done based on Number Modification configuration. If both the number and name are matched, modifications will be done based on Map to new caller ID name configuration. Match Name then Number: If the Name is matched, modification will be done based on Map to new caller ID name configuration. If both the name and number are matched, modifications will be done based on Number Modification configuration. Match Number and Name: If both the number and name are matched, modifications will be done based on Number Modification and Map to new caller ID name configurations.
Match caller ID name	Enter the caller ID that you want to map to another one. Caller IDs are created when configuring SIP extensions. See Configuring IP extensions.
Map to new caller ID name	Enter the new caller ID name that you want to map to the one entered in the Match caller ID name field.
Block caller ID	Select to stop your caller ID from displaying on the destination phone.

Click Create.

Mapping a group of extensions to a caller ID name

If you want to map a group of extensions to a caller ID name, you can use the pattern for the extensions to do so.

For example, if you have a technical support team that has 10 extensions (8100-8110), instead of displaying each extension when making calls, you can just display one caller ID name “Support” for the whole team.

To map a group of extensions to a caller ID name

Go to Phone System > Profile > Caller ID Modification.
Click New.
In the Match number field, enter the pattern of the extensions, such as 81xx.
In the Match option field, select Match Number or Name.
In the Map to new caller ID name field, enter the caller ID name to which you want to map, such as “Support”.
Click Create.

Configuring phone profiles

Phone profiles contain the phone configurations that are mostly used and customized, such as the programmable phone keys. Phone profiles make extension configuration more flexible because phone users are allowed to choose the profile they want. In addition, any changes the administrator makes to a profile is automatically applied to the extensions that use the profile. For more information, see Configuring IP extensions.

The phone profiles configured here appear as Admin defined profiles when you configure an SIP extension.

To configure a phone profile

Go to Phone System > Profile > Phone.

Click New and configure the following:

GUI field		Description
Name		Enter a name for the profile.
Phone model		Select a phone model for the profile.
Time format		Select the time display format on the phone. North American: mm/dd/yyyy International: dd/mm/yyyy
Phone book		Select Local only to include the phone directory on this FortiVoice unit, and Global to include the phone directories of any remote FortiVoice units connected to this unit. For information on phone directories, see Creating contacts.
Phone language		Select the language display on the phone.
Description		Enter any notes you have for this profile.
VLAN		You may need to deploy phones using the existing IT infrastructure which only has one network drop for each employee. The network switch supports 802.1Q VLAN tagging and LLDP-MED. Some phones such as FortiFones have two network ports: LAN and PC. The recommended solution is to connect FortiFones to the switch using LAN port and connect the computer to the PC port of FortiFones. VLAN tag needs to be enabled to segregate FortiFone voice network and PC data network.
	Option	If you select Manual, configure the following: Enable VLAN tagging for voice: Select to enable VLAN tagging to segregate FortiFone voice network and PC data network. Voice VLAN ID: Enter your organization’s VLAN ID for voice. Priority for voice: Enter the traffic service level recommended by the IEEE. Each number represents a traffic type. The range is from 0-7, with 7 being the highest. 0: Background 1: Best Effort 2: Excellent Effort 3: Critical Applications 4: Video, < 100 ms latency and jitter 5: Voice, < 10 ms latency and jitter 6: Internetwork Control 7: Network Control Enable VLAN tagging for data: Select to enable VLAN tagging to segregate PC data network and FortiFone voice network. Data VLAN ID: Enter your organization’s VLAN ID for data. Priority for data: Enter the traffic service level recommended by the IEEE. Each number represents a traffic type. The range is from 0-7, with 7 being the highest. 0: Background 1: Best Effort 2: Excellent Effort 3: Critical Applications 4: Video, < 100 ms latency and jitter 5: Voice, < 10 ms latency and jitter 6: Internetwork Control 7: Network Control If you select LLDP (Link Layer Discovery Protocol), the FortiVoice unit automatically generates the configuration file. You need to enable LLDP support on your network switch. Enable LLDP transmit status: Enable or disable the LLDP transmit status to allow listening or learning LLDP-MED from the switch only. This option applies to FortiFone-175,375,475,575,670,675,H25, and H35.
Automatic Configuration
	Display option	Select what to display on the extension: the extension user’s name only or name and number.
	Digit map pause timer	Enter the digit map timeout in seconds which defines the waiting time between the completion of dialing number entering and initiating the call. For example, if you enter 5 and use the default digit map syntax, the phone will initiate a call 5 seconds after you finish entering the dialing number.
	Intercom barge	If you select FortiFone-175, 375, or 475 for Phone model, you can enable intercom barge to allow intercom drop-in in a phone conversation.
	Screensaver timer	Select the screen saver time for the phone model you selected. This option varies for different phone models and is not available for all phone models.
	Button transparency	Select the percentage of phone buttons’ background color transparency. This option does not apply to all models.
	Backlight time	Set the phone backlight time to illuminate the screen in low light conditions.
	Hangup delay	Set the delay time to disconnect calls after hanging up. This option does not apply to all models.
	Use pound(#) as dial or send key	Enable if required. This option does not apply to all models.
	Popup missed call	Enable if required. This option does not apply to all models.
	Keep alive	Enter a value for FortiFone to send a packet to the FortiVoice unit at the interval of the entered keep alive value to keep the firewall ports open at all time. This is to ensure that calls are not missed due to the registration time change for external IP extensions. For example, if you enter 40, FortiFone will send a 2 byte packet every 40 seconds to keep the firewall ports open. This option does not apply to all models.
	External keep alive	This option is available when you select FortiFone-X80 for Phone model. For external FortiFone-X80 extensions, the default keep alive option is 40 seconds. This is to ensure that calls are not missed due to the registration time change for external IP extensions.
	DST type	Set the Daylight Saving Time for the phone. This option does not apply to all models. Disabled: DST on the phone is disabled. Automatic: DST on the phone is automatically set based on your location.
	Appearance Transfer	Choose the call transfer mode for the extension appearance programmable key of FortiFone-x80 phones. The default is Blind. Blind: Allows you to transfer a call without speaking to the person receiving the transfer. Attended: Allows you to announce the call to the person receiving the transfer before completing the transfer. For information on extension appearance programmable keys, see Configuring programmable keys profiles.
Phone Image Setting	This option allows you to change the background image on FortiFone-X80. This option only appears when you edit a phone profile. Click Change to upload the image. Click Reset to restore the default image setting. File requirements for a background image: Supported format: jpg Supported sizes: FON-380: 480 x 320 pixels FON-480: 480 x 272 pixels FON-580: 480 x 272 pixels
Hotel	If you select FortiFone-H35 for Phone model, enter the hotel contact information and instructions on how to dial rooms, local, long distance, and international number. You may also select the font color for the call display.
Soft Button In Idle Status	Optionally, enable the 4 soft buttons and make them functional in idle status. This option does not apply to all models.
Phone Password	Enter a password for the phone users to access their phone web GUIs and configure the advanced settings on the phones. This only applies to the supported phones.

Click Create.

Configuring programmable keys profiles

The Programmable Keys submenu lets you configure the programmable keys for FortiFone phones. For FortiFone phones with expansion modules or multiple key pages, you can select the module or page to program the keys.

After a programmable keys profile is applied to an extension, the keypad programming is always the same regardless of the phone for the extension.

To configure a programmable keys profile

Go to Phone System > Profile > Programmable Keys.
Click New.
Enter the profile name, select a phone type, enter any notes you have for the profile, and click Create.

Double-click the profile you created and configure the following:

GUI field		Description
Provisioning lines		Select the phone lines you want to reserve. For example, if you select 2 for this phone, number 1 and 2 on the keypad become reserved for phone lines.
Number of expanded modules		Select the number of expanded modules for the keypad. This option only appears for certain FortiFone models.
Number of pages to be used on this phone		Select the number of pages for the keypad. This option only appears for certain FortiFone models.
Base/Page/Expanded Module		Fields display depending on the phone model.
	Option	The keypad number of the phone.
	Mode	User: Allows the user to set a programmable key using the FortiVoice user portal and endpoints (FortiFone desk phone and FortiFone softclient for desktop). Admin (with User Assigned function): Allows the user to set a programmable key using a FortiFone desk phone. Admin: Allows you to set a programmable key with a function, resource and label, as applicable. The user cannot make changes to that programmable key.
	Function	Select the function assigned to this key.
	Resource	For some functions, you need to enter the information in this field based on your phone configuration. For example, if you select function Line appearance for key 3, select what the line is for in this field.
	Label	For some functions, you can add a explanatory label for the key.

Click OK.

Programmable keys descriptions

Function

Description

Resource

Label

Call forward

Allows you to enable or disable and configure the Call Forward feature.

Stays blank.

Edit the label or keep the default label (Call forward).

DTMF

When you are on a call and you press the DTMF key, the system dials the configured DTMF digits.

This key is useful when you need to enter consistent codes at an interactive voice response (IVR) system.

The DTMF function is only available during a call.

Enter the DTMF

digits to dial when you press this programmable key on your phone.

Edit the label or keep the default label (DTMF).

Extension appearance

Allows you to do the following:

Monitor the status of the selected extension (idle, ringing, in use, DND, and on hold).
On FortiFone-x80 phones: Transfer a call to the selected extension. The transfer is blind on attended depending on the appearance transfer configuration. See Configuring phone profiles.

Select an extension from the list.

Edit the label or keep the one associated with the selected extension.

Intercom

Allows you to use the phone speaker of a local extension as an intercom.

This function works for internal extensions only.

Stays blank.

Edit the label or keep the default label (Intercom).

Line appearance

Allows you to monitor the status of a line (available, busy, or on hold).

Select a line.

Edit the label or keep the one associated with the selected line (or trunk).

Park

Places the call into the first available call park slot. You will hear a prompt telling you which slot the call has been parked in.

Stays blank.

Edit the label or keep the default label (Auto park).

Park appearance

Monitors the selected call park slots, informing you if there is a call parked.

Select the park slot to monitor.

Edit the label or keep the one associated with the selected line (or slot).

Reserved for line

By default, the FortiVoice phone system reserves the first two programmable keys for lines on the phone so you can monitor your own calls on those lines.

If your phone has additional lines, then you can use the Reserved for line function to program the appearance of those lines.

If multiple accounts have been configured on this extension, choose which account to monitor.

Edit the label or keep the one associated with the selected line (or account).

System speed dial

Allows you to quickly place a call to the selected extension or phone number at a touch of a button.

Make a selection.

Edit the label or keep the one assigned by the FortiVoice system administrator.

Twinning

Allows an external phone to ring along with your office phone, so you can answer the call at either phone. Pressing the Twinning programmable key enables or disables the feature.

Before using this function, make sure that a profile (with twinning enabled) is applied to the extension.

Stays blank.

Edit the label or keep the default label (Twinning).

User speed dial

Allows you to quickly place a call to the selected extension or phone number at a touch of a button.

Select a contact from your speed dial list.

Edit the label or keep the one associated with the selected contact.

Configuring RADIUS authentication profiles

The FortiVoice unit supports RADIUS authentication method by using the RADIUS profiles that you configure.

To configure a RADIUS profile

Go to Phone System > Profile > RADIUS.
Click New.
Configure the following:

GUI field		Description
Profile name		Enter a name for this profile.
Server name/IP		Enter the fully qualified domain name (FQDN) or IP address of a server that will use RADIUS method to authenticate users.
Server port		Enter the port number on which the authentication server listens. You must change this value if the server is configured to listen on a different port number, including if the server requires use of SSL. The default port is 1812.
Protocol		Select the authentication scheme for the RADIUS server.
Server secret		Enter the secret required by the RADIUS server. It must be identical to the secret that is configured on the RADIUS server.
Server requires domain		Enable if the authentication server requires that users authenticate using their full email address (such as user1@example.com) and not just the user name (such as user1).

Click Create.

Configuring user privileges

A user privilege includes a collection of phone services and restrictions that can be applied to each extension user.

The default user privilege configurations can be edited but cannot be deleted.

For information on extensions, see Configuring extensions.

To configure a user privilege

Go to Phone System > Profile > User Privilege.
Click New.

Configure the following:

GUI field		Description
Name		Enter a name for this profile.
Basic Setting
	Auto provisioning	Select to enable auto-provisioning for the extension. For more information, see Configuring SIP phone auto-provisioning. Once a FortiFone or supported DHCP-enabled phone connects to the FortiVoice unit and is auto-discovered, the FortiVoice unit assigns an IP address to the FortiFone and sends the basic PBX setup information to it. The full PBX configuration file will only be sent to the phone if this option is selected in the user privilege applied to the extension associated with the phone.
	List in directory	Select to put the user’s name in the dial-by-name directory which allows a caller to find a user’s extension number, and connect to their local extension or remote extension. This way the caller can reach their party without speaking to the receptionist.
	Configure programmable phone feature key/PFK	Select to enable configuring the feature access codes. For more information, see Modifying feature access codes.
	Softclient API login	Select to enable FortiVoice softclient to log into the FortiVoice unit.
	Lookup directory	Select to enable a user to view the phone directory of the local office. For more information, see The Fax Queue tab lists the faxes waiting to be sent or having failed to be sent on the FortiVoice unit. You can download the faxes. For more information about fax, see Configuring fax..
	Lookup directory in remote office(s)	Select to enable a user to view the phone directories of remote offices. For more information, see The Fax Queue tab lists the faxes waiting to be sent or having failed to be sent on the FortiVoice unit. You can download the faxes. For more information about fax, see Configuring fax..
	Twinning	Select to enable twinning function on an extension. The twinning feature allows you to use an external telephone (often a smartphone or home phone) to replicate your internal office extension (often your desk phone), so that when your desk phone rings, so does the “twin” phone. Once you return to your desk, you may press the Twinning key on the phone to terminate the twinning. This is useful when you are away from your desk but still want to receive calls to your desk phone. With this feature selected, you can configure twinning. For more information, see Setting extension user preferences.
Operator Role		Select to enable an extension user to process phone calls using the FortiVoice user portal. You can select the four options to handle calls in each category. When the user privilege with this option selected is applied to an extension, an OperatorConsole button will appear on the top of the extension user’s FortiVoice FortiVoice user portal. Clicking the button lets the user process phone calls on the Web.
Voicemail		Select to enable the voicemail service.
	Maximum messages	Enter the number of voicemails allowed.
	Voicemail retention days	Enter the number of days to keep the voicemails.
Music
	Music on hold	Select a music on hold file. For details, see Managing phone audio settings .
	Early media	Early media is the exchange of information between the PBXes before the establishment of a phone connection, such as the ring tone. You can select a music file for early media. For details, see Managing phone audio settings .
Fax		Select to set the fax rules for users. For information on fax, see Configuring fax.
	Max incoming messages	Enter the number of incoming faxes allowed.
	Max incoming fax retention days	Enter the number of days to keep the incoming faxes.
	Max outgoing messages	Enter the number of outgoing faxes allowed.
	Max outgoing fax retention days	Enter the number of days to keep the outgoing faxes.
Call Restriction		Select call dialing restrictions for international, long distance, local, and internal calls. Forbidden: Call is not allowed. Allowed: Call is allowed. Allowed with Account Code: Call is allowed by entering the system account/exempt code. For information on account code, see Configuring account codes. Not applicable to internal calls. Allowed with Personal Code: Call is allowed by entering an extension’s account/exempt code. For more information, see Configuring account codes. Not applicable to internal calls. Allowed with Account and Personal Code: Call is allowed by entering the system and extension account/exempt codes. Not applicable to internal calls.
	Other Restricted Area Code	You can specify area codes to which an extension is allowed or denied to make phone calls. Click New. Enter a name for this call restriction. Select Enabled to activate this restriction. Enter the area code that you want to set restriction. Select the permission for the area code. For more information, see Call Restriction. Click Create.
	Miscellaneous	The max number of concurrent calls: Set the maximum number of concurrent incoming and outgoing calls on the extension. The range is 1-10. The default is 4.
Monitor/Recording		Configure monitoring and recording outgoing and incoming calls of an extension to which this user privilege is applied.
	Personal recording	Select to allow users to configure personal recording of their incoming and outgoing calls on the user web interface.
	System recording	Select to allow users to configure system recording of their incoming and outgoing calls on the user web interface.
	Allow being barged	Select to allow monitoring an extension to which this user privilege is applied.
	Allow barging	Select to allow the extension to which this user privilege is applied to monitor other extensions. To barge a call, you need to enter your user PIN. For information on user PIN, see Configuring IP extensions.
	Call barge option	If you select Allow barging, choose a barging method. To perform call barging, you need to enter your voicemail PIN.
Hot-desking		Hot desking enables users to log into another phone. However, unlike using Follow Me or Call Forwarding which simply redirect a user's calls to another user’s phone, hot desking takes total control of another phone by applying all of the user's own phone Setting to that phone until the user logs out. Each user can log into another phone by pressing 11 and enter his extension number and user PIN following the prompts. To log out, a user can press 12. You can view hot desking configurations by going to Viewing activity details of hot desking extensions. Enable hot-desking login: Select to enable the hot-desking login function. Automatic logout hours: Enter the time in hours for the phone to automatically log out of hot-desking. Enable hosting hot-desking: Select if you want to log into a regular phone with the hot-desking phone authentication (by pressing *11 and enter your extension number and user PIN following the prompts). By selecting this option, the old extension is taken over by the new extension on this phone. After logging out the phone with the hot-desking phone authentication, the old extension is recovered. However, outgoing calls still display the hotd-esking extension number. The regular phone logs out of hot-desking when the time set in Automatic logout hours expires. If the two phones use different programmable phone keys, the host phone will reboot. For information on programmable phone keys, see Configuring phone profiles.
User Portal		Enable or disable the user portal and select the features for it. Only the selected ones will appear for the extension to which this user privilege is applied.
Entitlement		This option controls the use of unified communication and enhanced call center features. Unified communication: Select to allow the use of third party communication applications, including: Microsoft Teams Presence for desktop application Instant messaging service and clients on endpoints Video conferencing service and client on endpoints Screen sharing File sharing Enhanced call center: Select to allow the use of enhanced call center features, including: Agent console for desktop application Enhanced FortiVoice IVR Salesforce integration
Advanced Setting
	Conference number	Select the permission for conference calls: Allow All: Select to allow the extension to join all conference calls. Disallow All: Select to prohibit the extension from joining all conference calls. Allow All with Exempt: If you select this option, click New to enter the conference call number(s) that the extension is banned to join. Disallow All with Exempt: If you select this option, click New to enter the conference call number(s) that the extension is allowed to join. For more information, see Configuring auto attendants.
	Paging/Intercom	Select the permission for paging/intercom: Allow All: Select to allow the extension to page/intercom all paging numbers. Disallow All: Select to prohibit the extension to page/intercom all paging numbers. Allow All with Exempt: If you select this option, click New to enter the paging/intercom number(s) that the extension is banned to page/intercom. Disallow All with Exempt: If you select this option, click New to enter the paging/intercom number(s) that the extension is allowed to page/intercom. For more information on paging, see Configuring auto attendants.
	Trusted hosts type	Select the type of the subnet that can register with the SIP server. Only extensions on the specified subnet can register with the SIP server. If you select User defined, enter the information in Trusted hosts.
	Trusted hosts	Enter the IP address and netmask of the subnet that can register with the SIP server. You can add multiple trusted hosts.
	Permitted outgoing rules	Enable or disable all available outbound calling rules. For more information on calling rules, see Configuring outbound dial plans.

Click Create.

Configuring emergency zone profiles

You configure an emergency zone profile to include the detailed contact information in case of emergencies.

To configure an emergency zone profile

Go to Phone System > Profile > Emergency Zone.

Click New and configure the following:

GUI field	Description
Name	For a new profile, enter its name.
Emergency caller ID	Enter the caller ID to display on the destination phone when you dial the emergency number, such as 911.
Description	Enter any notes you have for this profile.
Emergency Setting	Configure to send an alert email when an emergency call is made. Select Do nothing if you do not want the FortiVoice unit to send an alert email. Otherwise, select Send alert email and enter the following: Emergency contact emails: Enter the email address for emergency contact. You can click + and add more addresses. Emergency barge number: Enter an authorized user’s extension number to be dialed. When an ongoing emergency call is in progress, the phone of the authorized user also rings. This user can listen to the call and talk, if necessary. Emergency message group number: Select a message group number for emergency contact. This number is dialed when an emergency call is made. For more information about message groups, see Creating message groups.
Contact Information	Enter the emergency contact information for the profile.

Click Create.

Scheduling the FortiVoice unit

You can schedule the FortiVoice operation time and use the schedules when configuring dial plans, virtual numbers, or auto attendant on the system level. The default schedules, namely after_hour, any_time, business_hour, and holiday, can be modified but cannot be deleted.

Depending on your preference, you can create either a standard or a calendar-based schedule.

For information on dial plan, see Configuring call routing.

For information on virtual numbers, see Working with virtual numbers.

For information on call management, see Setting extension user preferences.

To configure a standard schedule

Go to Phone System > Profile > Schedule and click New.
Enter a profile name and select Standard for Mode.
Click Create.
In the schedule list, select the profile name you created and click Edit.
For Week Day, select the days to include in the schedule and set the AM and PM time or select Full Day.
For Holiday, click New to set the holidays. For example, select 01/01/12 in the Date field and enter New Year’s Day in the Description field, and click Create.
Click OK.

To configure a calendar-based schedule

Go to Phone System > Profile > Schedule and click New.
Enter a profile name and select Calendar for Mode.
Click Create.
In the schedule list, select the profile name you created and click Edit.
Double-click a date to schedule an event.
Click OK.