Applying the FXO gateway configuration

The FortiVoice phone system stores a gateway configuration file. Use this procedure to apply this gateway configuration file to the FXO gateway.

Prior to applying the configuration file, make sure that the FortiVoice phone system and FXO gateway are running the 6.0.x firmware version. Supported setup examples for Apply Configuration: FortiVoice 6.0.12 with FXO gateway 6.0.11 or 6.0.12 FortiVoice 6.0.11 with FXO gateway 6.0.12 Unsupported setup example for Apply Configuration: FortiVoice 6.4.7 with FXO gateway 6.0.11 or 6.0.12 To verify the firmware version, go to Dashboard > Status. In the System Information widget, go to Firmware version.

Procedure steps

1. In the GUI of the FortiVoice phone system, go to Managed System > Gateway.
2. In the FXO Gateway tab, review the list and select the gateway to which you want to apply the configuration file.
3. Click Apply Configuration.

FortiVoice displays the following message:

Do you really want to update selected gateway?

4. Click OK.

The FortiVoice phone system applies configuration changes to the dial plan routes of the FXO gateway.

With a successful update, the FXO gateway displays the following message:

Gateway upgrade finished.

Successful:<gateway_name>

5. Click OK.

You have completed this procedure.

6. Go to Verifying the FXO gateway association.