Configuring a speed dial pattern for branch paging
Use this procedure to configure a speed dial pattern for branch paging. You will use this pattern later in the workflow in Adding a survivability branch.
- Connect to the web-based manager of the primary FortiVoice phone system at the main office.
- Go to Phone System > Settings, and then click the Options tab.
- In Speed dial pattern, add one or more codes.
The FortiVoice phone system supports the following characters in a speed dial code:
0 to 9
Numbers from zero to nine
Capital letter x
The following table lists speed dial code examples for branch paging:
To page a three-digit room with a leading start. All rooms starting with the number 3.
To page a three-digit room.
To page a four-digit room with a leading star.
To page all rooms using #0.
- Click Apply.
You have completed this procedure.
- Go to Adding a survivability branch.