Starting a Mixed Traffic test

4.1.0

Copy Link

Copy Doc ID 0fc7455d-2de0-11eb-96b9-00505692583a:277268

Download PDF

Starting a mixed traffic test

FortiTester tests mixed traffic performance by simulating multiple clients that burst all types of traffic simultaneously.

To start a Mixed Traffic test:

Go to Cases > Performance Testing > Mixed Traffic to display the test case summary page.
Click + Create New to display the Case Options dialog box.
In the popup dialog, select the kind of mixed traffic test you wish to create. You can create a test based on Protocol, Action, Case Type, or Existing Test Cases.
Select the traffic template when you create a test by protocol. When the template is Enterprise Traffic, Bandwidth Traffic, or Default, you can click any part of the pie chart to set the proportions.

For Enterprise traffic mix, FortiTester requires VM16 or above, with minimum 32GB of RAM assigned; as more processing power is required if more protocols are initiated.
Select the types of traffic to mix in the test.
For the Network Config option, select the network template you have created in Cases > Security Testing > Objects > Networks. Then the network related options will automatically be filled. See Using network configuration templates for how to create a network template.
Select a Certificate Group if applicable.
Click OK to continue.
Configure the proportions of the mixed traffic.
Configure the test case options as described below. The specific settings will depend on what types of traffic were included in the mix. Refer to the section for that specific test for more information.
Click Start to run the test case.

FortiTester saves the configuration automatically, so you can run the test again later. You can also click Save to save the test case without running it.

Tip: You can also copy an existing case, and change its settings to create a new case. In the case list, click Clone to clone the configuration. Only the case name is different from the original case.

Mixed Traffic Test Case configuration

Settings	Guidelines
Basic Information
Name	Specify the case name, or just use the default. The name appears in the list of test cases.
Ping Server Timeout	If a FortiTester connects to a DUT via a switch, the switch might cause a ping timeout, resulting in the test case failing to run. If this occurs, increase the timeout. The default is 15 seconds. The valid range is 0 to 600.Note:You can disable this end-to-end connectivity test by entering a setting of 0. If the DUT is unable to return packets, it is recommended you do so.
Number of Samples	Select the number of samples. The default is 20, which means the web UI will show the last 20 sample data (about 20 seconds) in the test case running page. You can select 20, 60, or 120.
Duration	Specify the test duration. The default is 10 minutes. The test stops automatically after the duration you specify.
Stopping Status in Second	The maximum time out in seconds allotted for FortiTester to close all TCP connections after the test finishes.
Network Settings If you have selected a network config template, the network settings automatically inherit the configurations in the template. See Using network configuration templates for the description of network settings.
Client/Server Network
Network MTU	Maximum Transmission Unit for a data packet. FortiTester does not send out data packets larger than this value. Most DUTs have a limitation for packet size. The default is 1500. Not configurable.
Network MSS	The maximum segment size. If MSS is bigger than the MTU, IP fragmentation will be triggered conditionally.
Protocol Settings Configure settings for the cases you have selected When creating a case.
Load
Mode	Simuser: Simulated users. Simuser simulates a user processing through an Actions list one at a time. It allows you to determine the maximum number of concurrent users your device, infrastructure, or system can handle. Connections/second: This mode simulates TCP connections, each of them containing up to hundreds of transactions. It's useful to test how many concurrent connections can be handled by your device.
Simulated Users	Number of users to simulate.
Maximum Concurrent Connections	Determines the maximum number of concurrent TCP connections supported through or with the DUT/SUT. This test is intended to find the maximum number of entries the DUT/SUT can store in its connection table.
Loops	Number of times to send the attacks. 0 means as many as possible.
Connections per Second	Rate of new connections per second. The default is 0, which means the device will Second create connections as fast as possible. Available only when Connections/second is selected for Mode.
Ramp Up Time	Time in seconds for traffic to ramp up when you start the test.
Ramp Down Time	Time in seconds for traffic to ramp down when you stop the test.
Time Out	The default is 1000 microseconds.
Renew Socket	Specify Yes or No. If Yes, the client side renews a socket to send out the next query (note if the client profile “Domain Policy” is set as List, all queries for the names in the domain list will use the same socket; after that a new socket will be created for next batch of queries). If No, use the old socket.
SMTP Email Address	The email sender address. The default is “tester@mailserver.com”.
SMTP Email To	The email receiver address. The default is “receiver@mailserver.com”.
Enable Authentication	Enable to use password when sending SMTP email.
SMTP Email Password	The password of email sender. The default is “tester@fts”.
Email Address	The email sender address. The default is “tester@mailserver.com”.
Email Password	The password of email sender. The default is “tester@fts”.
Enable Attachment	Enable to add attachment in the email.
Attachment File Object	Select the file template you have created in Cases > Performance Testing > Objects > Files, then enter how many files you want to include in the attachment. For example, if you enter 3, the first three files in the file template will be included. Only available when the Enable Attachment is selected.
Certificate	The server certificate. If you have selected a certificate group in the Select case options window, then you are not allowed select certificate here.
Think Time	The delay between client HTTP requests (unit: second).
Requests per Connection	Number of HTTP requests per connection. The default is 0, which means as many as possible. The valid range is 0 to 50,000.
HTTP Request Time Out	An HTTP request timeout occurs when an HTTP request is issued, but no data is responded back from the server within a certain time (in seconds). The timeout usually indicates an overwhelmed server or reverse proxy, or an outage of the back-end transactions processing servers. FortiTester will reset the connection upon timeout.
Delay	The period that FortiTester will wait until it sends the next web application attack.
Flows	Enter the port pair.
Traffic Direction	Specify the direction of traffic flow.
Frame Size	The range of frame size is 64 to 8192. When the (frame size-18) is larger than MTU, the UDP packet will be fragmented.
Packet Size	Specify the desired packet sizes, in bytes.
Traffic Cycle Time	Traffic burst duration in seconds for each frame size. (minimum of 10)
Aging Time	Wait time for packet transmitting after traffic stop, in seconds. (range: 2 - 300)
Maximum Iterative Cycle	Maximum traffic cycle for each frame size. (minimum 1)
Acceptable Packet Loss Rate	Percentage of packets that can be lost.
Send Speed	Speed in Mbps. A setting of 0 means throughput speed is copied from the BaseValue case.
Iteration Mode	Select either Binary Search to search using binary search mode or Custom Load to search using a custom load.
Initial Concurrent TCP Connections	The number of concurrent TCP connections FortiTester creates at the beginning of the test.
Maximum Concurrent TCP Connections	The maximum number of concurrent TCP connections FortiTester will create during the test.
Concurrent Resolution Connections	FortiTester stops the binary search if the number of concurrent connections is less than the value set here.
Acceptable Failure Rate	Specify an acceptable failure rate.
RADIUS Request Time Out	Time in microseconds before a RADIUS request times out.
Initial Traffic Cycle Time	Traffic burst duration in seconds for each frame size. (minimum of 2)
Maximum Traffic Cycle Time	Maximum traffic cycle, in seconds.
Duration Resolution Time	If the time difference between two iterations is lower than the specified value here, no iteration will be done.
Initial Send Speed	Binary Search only. Specify a speed in Mbps. A setting of 0 means the speed will be set through automatic detection.
Maximum Send Speed	Speed in Mbps. A setting of 0 means throughput speed is copied from the BaseValue case.
Send Resolution Speed	Binary Search only. Specify a minimum send speed of the traffic cycle for each frame size.
Up/Down Granularity	Custom Load only. Traffic speed per cycle. 0 means sending speed in the next traffic cycle is equal to "Receive Mbps" in the previous cycle. 1 - 20 is the sending speed float percentage of maximum speed in the next cycle.
Correct Loss Rate Cycle	Custom Load only. Set to 1. Not configurable.
Throughput Buffer Size	Set the throughput buffer size. The valid range is from 64-10M.
TurboTcp Buffer Size	The size of the buffer sent to server when the TCP connection is established.
Bidirectional Traffic Flow	Select Enable to enable bidirectional traffic flow.
IKE Version	Select either version 1 or 2. For 1, configure IKE Mode and XAUTH.
Authentication Method	Select either PSK (Pre-shared Key) or Signature. If using a Signature you will need to import a client and server certificate.
Pre-shared Key	The parameter of IPsec.
Local Certificate	Select either of the certificates. If you have selected a certificate group in the Select case options window, then you are not allowed to select local certificate here.
Remote Certificate	Select either of the certificates. If you have selected a certificate group in the Select case options window, then you are not allowed select remote certificate here.
Replay Time Out	This timeout specifies how long the client waits for a response from the server. If the client does not receive a response within the timeout, it considers the packet lost. The default value is 2 milliseconds.
Break Once Packet Lost	Select Yes or No. The Yes option means when the system identifies packet loss (the server side has not received the packet that client sent out), it stops the current GTP replay (pcap file), and continues the test with the next GTP file. The No option (the default) means a break is not set; the current replay continues.
Input Pcap	Select a pcap file to send. Note the uploaded files can be used for future cases.
Evasion Types	Select the evasion types. FortiTester will corrupt custom HTTP pcap file according to the selected Evasion Types.
Random Evasion	Enable this option so that FortiTester can randomly call one of the available HTTP evasions.
DDoS Type	DDoS attack traffic: Single Packet Flood. After you select a type, selection boxes for subtypes are displayed below. To change the percentage mix of subtypes, double-click the pie chart and adjust the percentages.

Starting a mixed traffic test

FortiTester tests mixed traffic performance by simulating multiple clients that burst all types of traffic simultaneously.

To start a Mixed Traffic test:

Go to Cases > Performance Testing > Mixed Traffic to display the test case summary page.

Click + Create New to display the Case Options dialog box.

In the popup dialog, select the kind of mixed traffic test you wish to create. You can create a test based on Protocol, Action, Case Type, or Existing Test Cases.

Select the traffic template when you create a test by protocol. When the template is Enterprise Traffic, Bandwidth Traffic, or Default, you can click any part of the pie chart to set the proportions.

For Enterprise traffic mix, FortiTester requires VM16 or above, with minimum 32GB of RAM assigned; as more processing power is required if more protocols are initiated.

Select the types of traffic to mix in the test.

For the Network Config option, select the network template you have created in Cases > Security Testing > Objects > Networks. Then the network related options will automatically be filled. See Using network configuration templates for how to create a network template.

Select a Certificate Group if applicable.

Click OK to continue.

Configure the proportions of the mixed traffic.

Configure the test case options as described below. The specific settings will depend on what types of traffic were included in the mix. Refer to the section for that specific test for more information.

Click Start to run the test case.

FortiTester saves the configuration automatically, so you can run the test again later. You can also click Save to save the test case without running it.

Mixed Traffic Test Case configuration

Settings	Guidelines
Basic Information
Name	Specify the case name, or just use the default. The name appears in the list of test cases.
Ping Server Timeout	If a FortiTester connects to a DUT via a switch, the switch might cause a ping timeout, resulting in the test case failing to run. If this occurs, increase the timeout. The default is 15 seconds. The valid range is 0 to 600.Note:You can disable this end-to-end connectivity test by entering a setting of 0. If the DUT is unable to return packets, it is recommended you do so.
Number of Samples	Select the number of samples. The default is 20, which means the web UI will show the last 20 sample data (about 20 seconds) in the test case running page. You can select 20, 60, or 120.
Duration	Specify the test duration. The default is 10 minutes. The test stops automatically after the duration you specify.
Stopping Status in Second	The maximum time out in seconds allotted for FortiTester to close all TCP connections after the test finishes.
Network Settings If you have selected a network config template, the network settings automatically inherit the configurations in the template. See Using network configuration templates for the description of network settings.
Client/Server Network
Network MTU	Maximum Transmission Unit for a data packet. FortiTester does not send out data packets larger than this value. Most DUTs have a limitation for packet size. The default is 1500. Not configurable.
Network MSS	The maximum segment size. If MSS is bigger than the MTU, IP fragmentation will be triggered conditionally.
Protocol Settings Configure settings for the cases you have selected When creating a case.
Load
Mode	Simuser: Simulated users. Simuser simulates a user processing through an Actions list one at a time. It allows you to determine the maximum number of concurrent users your device, infrastructure, or system can handle. Connections/second: This mode simulates TCP connections, each of them containing up to hundreds of transactions. It's useful to test how many concurrent connections can be handled by your device.
Simulated Users	Number of users to simulate.
Maximum Concurrent Connections	Determines the maximum number of concurrent TCP connections supported through or with the DUT/SUT. This test is intended to find the maximum number of entries the DUT/SUT can store in its connection table.
Loops	Number of times to send the attacks. 0 means as many as possible.
Connections per Second	Rate of new connections per second. The default is 0, which means the device will Second create connections as fast as possible. Available only when Connections/second is selected for Mode.
Ramp Up Time	Time in seconds for traffic to ramp up when you start the test.
Ramp Down Time	Time in seconds for traffic to ramp down when you stop the test.
Time Out	The default is 1000 microseconds.
Renew Socket	Specify Yes or No. If Yes, the client side renews a socket to send out the next query (note if the client profile “Domain Policy” is set as List, all queries for the names in the domain list will use the same socket; after that a new socket will be created for next batch of queries). If No, use the old socket.
SMTP Email Address	The email sender address. The default is “tester@mailserver.com”.
SMTP Email To	The email receiver address. The default is “receiver@mailserver.com”.
Enable Authentication	Enable to use password when sending SMTP email.
SMTP Email Password	The password of email sender. The default is “tester@fts”.
Email Address	The email sender address. The default is “tester@mailserver.com”.
Email Password	The password of email sender. The default is “tester@fts”.
Enable Attachment	Enable to add attachment in the email.
Attachment File Object	Select the file template you have created in Cases > Performance Testing > Objects > Files, then enter how many files you want to include in the attachment. For example, if you enter 3, the first three files in the file template will be included. Only available when the Enable Attachment is selected.
Certificate	The server certificate. If you have selected a certificate group in the Select case options window, then you are not allowed select certificate here.
Think Time	The delay between client HTTP requests (unit: second).
Requests per Connection	Number of HTTP requests per connection. The default is 0, which means as many as possible. The valid range is 0 to 50,000.
HTTP Request Time Out	An HTTP request timeout occurs when an HTTP request is issued, but no data is responded back from the server within a certain time (in seconds). The timeout usually indicates an overwhelmed server or reverse proxy, or an outage of the back-end transactions processing servers. FortiTester will reset the connection upon timeout.
Delay	The period that FortiTester will wait until it sends the next web application attack.
Flows	Enter the port pair.
Traffic Direction	Specify the direction of traffic flow.
Frame Size	The range of frame size is 64 to 8192. When the (frame size-18) is larger than MTU, the UDP packet will be fragmented.
Packet Size	Specify the desired packet sizes, in bytes.
Traffic Cycle Time	Traffic burst duration in seconds for each frame size. (minimum of 10)
Aging Time	Wait time for packet transmitting after traffic stop, in seconds. (range: 2 - 300)
Maximum Iterative Cycle	Maximum traffic cycle for each frame size. (minimum 1)
Acceptable Packet Loss Rate	Percentage of packets that can be lost.
Send Speed	Speed in Mbps. A setting of 0 means throughput speed is copied from the BaseValue case.
Iteration Mode	Select either Binary Search to search using binary search mode or Custom Load to search using a custom load.
Initial Concurrent TCP Connections	The number of concurrent TCP connections FortiTester creates at the beginning of the test.
Maximum Concurrent TCP Connections	The maximum number of concurrent TCP connections FortiTester will create during the test.
Concurrent Resolution Connections	FortiTester stops the binary search if the number of concurrent connections is less than the value set here.
Acceptable Failure Rate	Specify an acceptable failure rate.
RADIUS Request Time Out	Time in microseconds before a RADIUS request times out.
Initial Traffic Cycle Time	Traffic burst duration in seconds for each frame size. (minimum of 2)
Maximum Traffic Cycle Time	Maximum traffic cycle, in seconds.
Duration Resolution Time	If the time difference between two iterations is lower than the specified value here, no iteration will be done.
Initial Send Speed	Binary Search only. Specify a speed in Mbps. A setting of 0 means the speed will be set through automatic detection.
Maximum Send Speed	Speed in Mbps. A setting of 0 means throughput speed is copied from the BaseValue case.
Send Resolution Speed	Binary Search only. Specify a minimum send speed of the traffic cycle for each frame size.
Up/Down Granularity	Custom Load only. Traffic speed per cycle. 0 means sending speed in the next traffic cycle is equal to "Receive Mbps" in the previous cycle. 1 - 20 is the sending speed float percentage of maximum speed in the next cycle.
Correct Loss Rate Cycle	Custom Load only. Set to 1. Not configurable.
Throughput Buffer Size	Set the throughput buffer size. The valid range is from 64-10M.
TurboTcp Buffer Size	The size of the buffer sent to server when the TCP connection is established.
Bidirectional Traffic Flow	Select Enable to enable bidirectional traffic flow.
IKE Version	Select either version 1 or 2. For 1, configure IKE Mode and XAUTH.
Authentication Method	Select either PSK (Pre-shared Key) or Signature. If using a Signature you will need to import a client and server certificate.
Pre-shared Key	The parameter of IPsec.
Local Certificate	Select either of the certificates. If you have selected a certificate group in the Select case options window, then you are not allowed to select local certificate here.
Remote Certificate	Select either of the certificates. If you have selected a certificate group in the Select case options window, then you are not allowed select remote certificate here.
Replay Time Out	This timeout specifies how long the client waits for a response from the server. If the client does not receive a response within the timeout, it considers the packet lost. The default value is 2 milliseconds.
Break Once Packet Lost	Select Yes or No. The Yes option means when the system identifies packet loss (the server side has not received the packet that client sent out), it stops the current GTP replay (pcap file), and continues the test with the next GTP file. The No option (the default) means a break is not set; the current replay continues.
Input Pcap	Select a pcap file to send. Note the uploaded files can be used for future cases.
Evasion Types	Select the evasion types. FortiTester will corrupt custom HTTP pcap file according to the selected Evasion Types.
Random Evasion	Enable this option so that FortiTester can randomly call one of the available HTTP evasions.
DDoS Type	DDoS attack traffic: Single Packet Flood. After you select a type, selection boxes for subtypes are displayed below. To change the percentage mix of subtypes, double-click the pie chart and adjust the percentages.

Settings

Guidelines

Basic Information

Name

Specify the case name, or just use the default. The name appears in the list of test cases.

Ping Server Timeout

If a FortiTester connects to a DUT via a switch, the switch might cause a ping timeout, resulting in the test case failing to run. If this occurs, increase the timeout. The default is 15 seconds. The valid range is 0 to 600.Note:You can disable this end-to-end connectivity test by entering a setting of 0. If the DUT is unable to return packets, it is recommended you do so.

Number of Samples

Select the number of samples. The default is 20, which means the web UI will show the last 20 sample data (about 20 seconds) in the test case running page. You can select 20, 60, or 120.

Duration

Specify the test duration. The default is 10 minutes. The test stops automatically after the duration you specify.

Stopping Status in Second

The maximum time out in seconds allotted for FortiTester to close all TCP connections after the test finishes.

Network Settings
If you have selected a network config template, the network settings automatically inherit the configurations in the template. See Using network configuration templates for the description of network settings.

Client/Server Network

Network MTU

Maximum Transmission Unit for a data packet. FortiTester does not send out data packets larger than this value. Most DUTs have a limitation for packet size. The default is 1500. Not configurable.

Network MSS

The maximum segment size. If MSS is bigger than the MTU, IP fragmentation will be triggered conditionally.

Protocol Settings
Configure settings for the cases you have selected When creating a case.

Load

Mode

Simuser: Simulated users. Simuser simulates a user processing through an Actions list one at a time. It allows you to determine the maximum number of concurrent users your device, infrastructure, or system can handle.
Connections/second: This mode simulates TCP connections, each of them containing up to hundreds of transactions. It's useful to test how many concurrent connections can be handled by your device.

Simulated Users

Number of users to simulate.

Maximum Concurrent Connections

Determines the maximum number of concurrent TCP connections supported through or with the DUT/SUT. This test is intended to find the maximum number of entries the DUT/SUT can store in its connection table.

Loops

Number of times to send the attacks. 0 means as many as possible.

Connections per Second

Rate of new connections per second. The default is 0, which means the device will Second create connections as fast as possible.
Available only when Connections/second is selected for Mode.

Ramp Up Time

Time in seconds for traffic to ramp up when you start the test.

Ramp Down Time

Time in seconds for traffic to ramp down when you stop the test.

Time Out

The default is 1000 microseconds.

Renew Socket

Specify Yes or No. If Yes, the client side renews a socket to send out the next query (note if the client profile “Domain Policy” is set as List, all queries for the names in the domain list will use the same socket; after that a new socket will be created for next batch of queries). If No, use the old socket.

SMTP Email Address

The email sender address. The default is “tester@mailserver.com”.

SMTP Email To

The email receiver address. The default is “receiver@mailserver.com”.

Enable Authentication

Enable to use password when sending SMTP email.

SMTP Email Password

The password of email sender. The default is “tester@fts”.

Email Address

The email sender address. The default is “tester@mailserver.com”.

Email Password

The password of email sender. The default is “tester@fts”.

Enable Attachment

Enable to add attachment in the email.

Attachment File Object

Select the file template you have created in Cases > Performance Testing > Objects > Files, then enter how many files you want to include in the attachment. For example, if you enter 3, the first three files in the file template will be included. Only available when the Enable Attachment is selected.

Certificate

The server certificate. If you have selected a certificate group in the Select case options window, then you are not allowed select certificate here.

Think Time

The delay between client HTTP requests (unit: second).

Requests per Connection

Number of HTTP requests per connection. The default is 0, which means as many as possible. The valid range is 0 to 50,000.

HTTP Request Time Out

An HTTP request timeout occurs when an HTTP request is issued, but no data is responded back from the server within a certain time (in seconds). The timeout usually indicates an overwhelmed server or reverse proxy, or an outage of the back-end transactions processing servers. FortiTester will reset the connection upon timeout.

Delay

The period that FortiTester will wait until it sends the next web application attack.

Flows

Enter the port pair.

Traffic Direction

Specify the direction of traffic flow.

Frame Size

The range of frame size is 64 to 8192. When the (frame size-18) is larger than MTU, the UDP packet will be fragmented.

Packet Size

Specify the desired packet sizes, in bytes.

Traffic Cycle Time

Traffic burst duration in seconds for each frame size. (minimum of 10)

Aging Time

Wait time for packet transmitting after traffic stop, in seconds. (range: 2 - 300)

Maximum Iterative Cycle

Maximum traffic cycle for each frame size. (minimum 1)

Acceptable Packet Loss Rate

Percentage of packets that can be lost.

Send Speed

Speed in Mbps. A setting of 0 means throughput speed is copied from the BaseValue case.

Iteration Mode

Select either Binary Search to search using binary search mode or Custom Load to search using a custom load.

Initial Concurrent TCP Connections

The number of concurrent TCP connections FortiTester creates at the beginning of the test.

Maximum Concurrent TCP Connections

The maximum number of concurrent TCP connections FortiTester will create during the test.

Concurrent Resolution Connections

FortiTester stops the binary search if the number of concurrent connections is less than the value set here.

Acceptable Failure Rate

Specify an acceptable failure rate.

RADIUS Request Time Out

Time in microseconds before a RADIUS request times out.

Initial Traffic Cycle Time

Traffic burst duration in seconds for each frame size. (minimum of 2)

Maximum Traffic Cycle Time

Maximum traffic cycle, in seconds.

Duration Resolution Time

If the time difference between two iterations is lower than the specified value here, no iteration will be done.

Initial Send Speed

Binary Search only. Specify a speed in Mbps. A setting of 0 means the speed will be set through automatic detection.

Maximum Send Speed

Speed in Mbps. A setting of 0 means throughput speed is copied from the BaseValue case.

Send Resolution Speed

Binary Search only. Specify a minimum send speed of the traffic cycle for each frame size.

Up/Down Granularity

Custom Load only. Traffic speed per cycle. 0 means sending speed in the next traffic cycle is equal to "Receive Mbps" in the previous cycle. 1 - 20 is the sending speed float percentage of maximum speed in the next cycle.

Correct Loss Rate Cycle

Custom Load only. Set to 1. Not configurable.

Throughput Buffer Size

Set the throughput buffer size. The valid range is from 64-10M.

TurboTcp Buffer Size

The size of the buffer sent to server when the TCP connection is established.

Bidirectional Traffic Flow

Select Enable to enable bidirectional traffic flow.

IKE Version

Select either version 1 or 2. For 1, configure IKE Mode and XAUTH.

Authentication Method

Select either PSK (Pre-shared Key) or Signature. If using a Signature you will need to import a client and server certificate.

Pre-shared Key

The parameter of IPsec.

Local Certificate

Select either of the certificates. If you have selected a certificate group in the Select case options window, then you are not allowed to select local certificate here.

Remote Certificate

Select either of the certificates. If you have selected a certificate group in the Select case options window, then you are not allowed select remote certificate here.

Replay Time Out

This timeout specifies how long the client waits for a response from the server. If the client does not receive a response within the timeout, it considers the packet lost. The default value is 2 milliseconds.

Break Once Packet Lost

Select Yes or No. The Yes option means when the system identifies packet loss (the server side has not received the packet that client sent out), it stops the current GTP replay (pcap file), and continues the test with the next GTP file. The No option (the default) means a break is not set; the current replay continues.

Input Pcap

Select a pcap file to send. Note the uploaded files can be used for future cases.

Evasion Types

Select the evasion types. FortiTester will corrupt custom HTTP pcap file according to the selected Evasion Types.

Random Evasion

Enable this option so that FortiTester can randomly call one of the available HTTP evasions.

DDoS Type

DDoS attack traffic: Single Packet Flood. After you select a type, selection boxes for subtypes are displayed below. To change the percentage mix of subtypes, double-click the pie chart and adjust the percentages.

Handbook

Starting a Mixed Traffic test

Starting a mixed traffic test

To start a Mixed Traffic test:

Starting a mixed traffic test

To start a Mixed Traffic test: