Fortinet black logo

Handbook

Using 40G to 4 × 10 G fan out

Copy Link
Copy Doc ID 6a43e9d7-b060-11ea-8b7d-00505692583a:290958
Download PDF

Using 40 G to 4 × 10 G fan out

FortiTester now supports 4 × 10 G fan out. This feature splits the 40 G port into four separate 10 G ports. Use the corresponding cable to link the 10 G ports to the DUT.

This is available only on FortiTester 3000E.

To enable fan-out:
  1. Go to System > Settings.
  2. Switch 40 G fan-out 4 × 10 G to Enabled.
  3. Click OK .
  4. Wait for the system to reboot.

After you have rebooted the system, the fan out should be enabled. You can check it from System > Settings.

Using 40 G to 4 × 10 G fan out

FortiTester now supports 4 × 10 G fan out. This feature splits the 40 G port into four separate 10 G ports. Use the corresponding cable to link the 10 G ports to the DUT.

This is available only on FortiTester 3000E.

To enable fan-out:
  1. Go to System > Settings.
  2. Switch 40 G fan-out 4 × 10 G to Enabled.
  3. Click OK .
  4. Wait for the system to reboot.

After you have rebooted the system, the fan out should be enabled. You can check it from System > Settings.