Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Access control

The Management access control applies to following menus:

  • System > Dashboard

  • System > Config > Firmware

  • System > Revisions

  • System > Licenses

The Admin access control applies to the following menus:

  • System > Dashboard

  • System > Admin > Administrators

  • System > Admin > Profiles

  • System > Admin > Monitor

  • System > Authentication > LDAP

  • System > Authentication > RADIUS

  • System > Authentication > TACACS

The Switch Core access control applies to the following menus:

  • System > Dashboard

  • Switch > Physical Ports

  • Switch > Trunks

  • Switch > Interfaces

  • Switch > Port Security

  • Switch > STP > Settings

  • Switch > STP > Instances

  • Switch > Flap Guard

  • Switch > MAC Limit

  • Switch > ACL > Ingress

  • Switch > ACL > Egress

  • Switch > ACL > Prelookup

  • Switch > ACL > Policer

  • Switch > ACL > Service

  • Switch > POE

  • Switch > VLAN

  • Switch > Virtual Wires

  • Switch > MAC Entries

  • Switch > QoS > 802.1p

  • Switch > QoS > IP/DSCP

  • Switch > QoS > Egress Policy

  • Switch > Monitor > ACL Counters

  • Switch > Monitor > Forwarding Table

  • Switch > Monitor > Trunks

  • Switch > Monitor > Port Stats

  • Switch > Monitor > Spanning Tree

  • Switch > Monitor > Modules

  • Switch > Monitor > 802.1x Status

  • Switch > Monitor > IGMP Snooping

The Packet Monitor access control applies to the following menus:

  • System > Dashboard

  • System > Flow Export > Configure

  • System > Flow Export > Monitor

  • System > Packet Capture

  • Switch > sFlow

  • Switch > Mirror

The System Configuration access control applies to the following menus:

  • System > Dashboard

  • System > Network > Settings

  • System > Config > Backup

  • System > Config > Hostname

  • System > Config > Time

  • System > Config > SSL

  • System > Admin > Settings

  • System > User > Definition

  • System > User > Group

  • System > Certificate > Local

  • System > Certificate > Remote

  • System > Certificate > Authorities

  • System > Certificate > CRLs

  • System > Link Monitor

  • System > FortiLAN Cloud

  • System > Locations

  • Switch > DHCP Snooping

  • Router > Config > Link Probes

The Network Configuration access control applies to the follow menus:

  • System > Dashboard

  • System > Network > Interface > Physical

  • System > Network > Interface > VLAN

  • System > Network > Interface > Loopback

  • System > Network > DNS

  • System > DHCP

  • Router > Config > Interface

  • Router > ARP Table

The Log & Report access control applies to the follow menus:

  • System > Dashboard

  • System > Config > SNMP > Communities

  • System > Config > SNMP > Users

  • System > Config > SNMP > Settings

  • Log > Entries

  • Log > Config

The Router Configuration access control applies to the following menus:

  • System > Dashboard

  • Router > Config > OSPF > Settings

  • Router > Config > OSPF > Areas

  • Router > Config > OSPF > Networks

  • Router > Config > OSPF > Interfaces

  • Router > Config > RIP > Settings

  • Router > Config > RIP > Distances

  • Router > Config > RIP > Networks

  • Router > Config > RIP > Interfaces

  • Router > Config > Multicast > Settings

  • Router > Config > Multicast > Interfaces

  • Router > Config > Multicast > Flows

  • Router > Config > Access Lists

  • Router > Config > Static

  • Router > Config > IPv6 Static

  • Router > Config > VRF

  • Router > Monitor > Routing

  • Router > Monitor > IPv6 Routing

  • Router > Monitor > BFD Neighbor

  • Router > Monitor > VRRP

The Switch Monitor Guard access control applies to the following menus:

  • System > Dashboard

  • Switch > LLDP-MED > Profiles

  • Switch > LLDP-MED > Settings

  • Switch > Storm Control

  • Switch > IP-MAC Binding

  • Switch > Monitor > DHCP Snooping > Clients

  • Switch > Monitor > DHCP Snooping > Servers

  • Switch > Monitor > LLDP

  • Switch > Monitor > Loop Guard

  • Switch > Monitor > Flap Guard

  • Switch > Monitor > BPDU Guard

The Utility access control applies to the following menus:

  • GUI CLI

  • System > Dashboard

  • System > Debug Report

  • Router > Diagnostic

The Exec Alias access control applies to the following menus:

  • System > Dashboard

Access control

The Management access control applies to following menus:

  • System > Dashboard

  • System > Config > Firmware

  • System > Revisions

  • System > Licenses

The Admin access control applies to the following menus:

  • System > Dashboard

  • System > Admin > Administrators

  • System > Admin > Profiles

  • System > Admin > Monitor

  • System > Authentication > LDAP

  • System > Authentication > RADIUS

  • System > Authentication > TACACS

The Switch Core access control applies to the following menus:

  • System > Dashboard

  • Switch > Physical Ports

  • Switch > Trunks

  • Switch > Interfaces

  • Switch > Port Security

  • Switch > STP > Settings

  • Switch > STP > Instances

  • Switch > Flap Guard

  • Switch > MAC Limit

  • Switch > ACL > Ingress

  • Switch > ACL > Egress

  • Switch > ACL > Prelookup

  • Switch > ACL > Policer

  • Switch > ACL > Service

  • Switch > POE

  • Switch > VLAN

  • Switch > Virtual Wires

  • Switch > MAC Entries

  • Switch > QoS > 802.1p

  • Switch > QoS > IP/DSCP

  • Switch > QoS > Egress Policy

  • Switch > Monitor > ACL Counters

  • Switch > Monitor > Forwarding Table

  • Switch > Monitor > Trunks

  • Switch > Monitor > Port Stats

  • Switch > Monitor > Spanning Tree

  • Switch > Monitor > Modules

  • Switch > Monitor > 802.1x Status

  • Switch > Monitor > IGMP Snooping

The Packet Monitor access control applies to the following menus:

  • System > Dashboard

  • System > Flow Export > Configure

  • System > Flow Export > Monitor

  • System > Packet Capture

  • Switch > sFlow

  • Switch > Mirror

The System Configuration access control applies to the following menus:

  • System > Dashboard

  • System > Network > Settings

  • System > Config > Backup

  • System > Config > Hostname

  • System > Config > Time

  • System > Config > SSL

  • System > Admin > Settings

  • System > User > Definition

  • System > User > Group

  • System > Certificate > Local

  • System > Certificate > Remote

  • System > Certificate > Authorities

  • System > Certificate > CRLs

  • System > Link Monitor

  • System > FortiLAN Cloud

  • System > Locations

  • Switch > DHCP Snooping

  • Router > Config > Link Probes

The Network Configuration access control applies to the follow menus:

  • System > Dashboard

  • System > Network > Interface > Physical

  • System > Network > Interface > VLAN

  • System > Network > Interface > Loopback

  • System > Network > DNS

  • System > DHCP

  • Router > Config > Interface

  • Router > ARP Table

The Log & Report access control applies to the follow menus:

  • System > Dashboard

  • System > Config > SNMP > Communities

  • System > Config > SNMP > Users

  • System > Config > SNMP > Settings

  • Log > Entries

  • Log > Config

The Router Configuration access control applies to the following menus:

  • System > Dashboard

  • Router > Config > OSPF > Settings

  • Router > Config > OSPF > Areas

  • Router > Config > OSPF > Networks

  • Router > Config > OSPF > Interfaces

  • Router > Config > RIP > Settings

  • Router > Config > RIP > Distances

  • Router > Config > RIP > Networks

  • Router > Config > RIP > Interfaces

  • Router > Config > Multicast > Settings

  • Router > Config > Multicast > Interfaces

  • Router > Config > Multicast > Flows

  • Router > Config > Access Lists

  • Router > Config > Static

  • Router > Config > IPv6 Static

  • Router > Config > VRF

  • Router > Monitor > Routing

  • Router > Monitor > IPv6 Routing

  • Router > Monitor > BFD Neighbor

  • Router > Monitor > VRRP

The Switch Monitor Guard access control applies to the following menus:

  • System > Dashboard

  • Switch > LLDP-MED > Profiles

  • Switch > LLDP-MED > Settings

  • Switch > Storm Control

  • Switch > IP-MAC Binding

  • Switch > Monitor > DHCP Snooping > Clients

  • Switch > Monitor > DHCP Snooping > Servers

  • Switch > Monitor > LLDP

  • Switch > Monitor > Loop Guard

  • Switch > Monitor > Flap Guard

  • Switch > Monitor > BPDU Guard

The Utility access control applies to the following menus:

  • GUI CLI

  • System > Dashboard

  • System > Debug Report

  • Router > Diagnostic

The Exec Alias access control applies to the following menus:

  • System > Dashboard