Resolved issues
The following issues have been fixed in FortiOS 7.0.8. For inquiries about a particular bug, please contact Customer Service & Support.
| Bug ID | Description |
|---|---|
|
777145 |
The Managed FortiSwitches page incorrectly shows a warning about an unregistered FortiSwitch unit even though it is registered. This only impacts transferred or RMAed FortiSwitch units. This is only a display issue with no impact on the FortiSwitch unitʼs operation. |
| 794026 | The number of targets that can be configured in the config user quarantine command has been
raised from 256 to 4,000. |
|
803307 |
The Security Rating message of “Enable STP” was changed to “To avoid a switching loop, enable STP on the FortiSwitch ports once network topology is stable.” |
| 805154 | The pre-configuration for FS-108F-POE shows the wrong number of PoE ports. |
| 810550 | When synchronizing the configuration between the FortiGate device and some managed FortiSwitch units, “errno = 6” appears in the error logs. |
|
825377 |
After upgrading to FortiOS 7.0.6, there are multiple problems in the GUI for a FortiLink topology with VDOMs enabled. |
|
836604 |
The command for the managed switch port speed for a 40-Gbps copper interface was missing. You can now select |
|
838110 |
The |
|
838880 |
When you use NAC policies with EMS tags and switch groups, the endpoint does not match any policy if the endpoint matches both EMS tags and the switch groups are different. |