Fortinet black logo

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Introduction

This document provides the following information for FortiSwitchOS 7.0.6 build 0092.

See the Fortinet Document Library for FortiSwitchOS documentation.

Supported models

FortiSwitchOS 7.0.6 supports the following models:

FortiSwitch 1xx FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE
FortiSwitch 2xx FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE
FortiSwitch 4xx FS-424D, FS-424D-FPOE, FS-424D-POE, FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448D, FS-448D-FPOE, FS-448D-POE, FS-448E, FS-448E-POE, FS-448E-FPOE
FortiSwitch 5xx FS-524D-FPOE, FS-524D, FS-548D, FS-548D-FPOE
FortiSwitch 1xxx FS-1024D, FS-1024E, FS-1048D, FS-1048E, FS-T1024E
FortiSwitch 3xxx FS-3032D, FS-3032E
FortiSwitch Rugged FSR-112D-POE, FSR-124D

What’s new in FortiSwitchOS 7.0.6

Release 7.0.6 provides the following new features:

  • Three RADIUS attributes are now supported for RADIUS CoA-Request messages:

    • Tunnel-Type—VLAN (13)

    • Tunnel-Medium-Type—IEEE-802 (6)

    • Tunnel-Private-Group-ID—VLAN ID or VLAN name (13)

    NOTE: These attributes are also supported in FortiSwitchOS 6.4.12 and 7.2.2 or later.

  • The default value for the set dhcp-snoop-client-req command (under config system global) is now drop-untrusted, instead of forward-untrusted.

Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.

Introduction

This document provides the following information for FortiSwitchOS 7.0.6 build 0092.

See the Fortinet Document Library for FortiSwitchOS documentation.

Supported models

FortiSwitchOS 7.0.6 supports the following models:

FortiSwitch 1xx FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE
FortiSwitch 2xx FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE
FortiSwitch 4xx FS-424D, FS-424D-FPOE, FS-424D-POE, FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448D, FS-448D-FPOE, FS-448D-POE, FS-448E, FS-448E-POE, FS-448E-FPOE
FortiSwitch 5xx FS-524D-FPOE, FS-524D, FS-548D, FS-548D-FPOE
FortiSwitch 1xxx FS-1024D, FS-1024E, FS-1048D, FS-1048E, FS-T1024E
FortiSwitch 3xxx FS-3032D, FS-3032E
FortiSwitch Rugged FSR-112D-POE, FSR-124D

What’s new in FortiSwitchOS 7.0.6

Release 7.0.6 provides the following new features:

  • Three RADIUS attributes are now supported for RADIUS CoA-Request messages:

    • Tunnel-Type—VLAN (13)

    • Tunnel-Medium-Type—IEEE-802 (6)

    • Tunnel-Private-Group-ID—VLAN ID or VLAN name (13)

    NOTE: These attributes are also supported in FortiSwitchOS 6.4.12 and 7.2.2 or later.

  • The default value for the set dhcp-snoop-client-req command (under config system global) is now drop-untrusted, instead of forward-untrusted.

Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.