Fortinet Document Library

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Access control

The System Configuration access control applies to the following menus:

  • System > Dashboard
  • System > Network > DNS
  • System > Network > Settings
  • System > Config > SNMP > Communities
  • System > Config > SNMP > Users
  • System > Config > SNMP > Settings
  • System > Config > Firmware
  • System > Config > Backup
  • System > Config > Revisions
  • System > Config > Licenses
  • System > Config > Time
  • System > Config > SSL
  • System > User > Definition
  • System > User > Group
  • System > Authentication > LDAP
  • System > Authentication > RADIUS
  • System > Authentication > TACACS
  • System > Certificate > Local
  • System > Certificate > Remote
  • System > Certificate > Authorities
  • System > Certificate > CRLs

The Network Configuration access control applies to the follow menus:

  • System > Network > Interface > Physical
  • System > Network > Interface > VLAN
  • System > Network > Interface > Loopback
  • Switch > Port > Physical
  • Switch > Port > Trunk
  • Switch > Interface > Physical
  • Switch > Interface > Trunk
  • Switch > Interface > Port Security
  • Switch > STP > Settings
  • Switch > STP > Instances
  • Switch > Flap Guard
  • Switch > LLDP-MED > Profiles
  • Switch > LLDP-MED > Settings
  • Switch > POE
  • Switch > sFlow
  • Switch > Mirror
  • Switch > VLAN
  • Switch > Virtual Wires
  • Switch > Storm Control
  • Switch > MAC Entries
  • Switch > IP-MAC Binding
  • Switch > QoS > 802.1p
  • Switch > QoS > IP/DSCP
  • Switch > QoS > Egress Policy
  • Switch > Monitor > Forwarding Table
  • Switch > Monitor > Port Stats
  • Switch > Monitor > Spanning Tree
  • Switch > Monitor > Modules
  • Switch > Monitor > LLDP
  • Switch > Monitor > Loop Guard
  • Switch > Monitor > Flap Guard
  • Switch > Monitor > 802.1x Status

The Admin Users access control applies to the following menus:

  • System > Admin > Administrators
  • System > Admin > Profiles
  • System > Admin > Monitor
  • System > Admin > Settings

The Router Configuration access control applies to the following menus:

  • Router > Config > OSPF > Settings
  • Router > Config > OSPF > Areas
  • Router > Config > OSPF > Networks
  • Router > Config > OSPF > Interfaces
  • Router > Config > RIP > Settings
  • Router > Config > RIP > Distances
  • Router > Config > RIP > Networks
  • Router > Config > RIP > Interfaces
  • Router > Config > Static
  • Router > Config > Interface
  • Router > Config > Link Probes
  • Router > Monitor > Routing
  • Router > Monitor > Link

The Log & Report access control applies to the follow menus:

  • Log > Event Log > Link
  • Log > Event Log > POE
  • Log > Event Log > Spanning Tree
  • Log > Event Log > Switch
  • Log > Event Log > Switch Controller
  • Log > Event Log > System
  • Log > Event Log > Router
  • Log > Event Log > User
  • Log > Config

Access control

The System Configuration access control applies to the following menus:

  • System > Dashboard
  • System > Network > DNS
  • System > Network > Settings
  • System > Config > SNMP > Communities
  • System > Config > SNMP > Users
  • System > Config > SNMP > Settings
  • System > Config > Firmware
  • System > Config > Backup
  • System > Config > Revisions
  • System > Config > Licenses
  • System > Config > Time
  • System > Config > SSL
  • System > User > Definition
  • System > User > Group
  • System > Authentication > LDAP
  • System > Authentication > RADIUS
  • System > Authentication > TACACS
  • System > Certificate > Local
  • System > Certificate > Remote
  • System > Certificate > Authorities
  • System > Certificate > CRLs

The Network Configuration access control applies to the follow menus:

  • System > Network > Interface > Physical
  • System > Network > Interface > VLAN
  • System > Network > Interface > Loopback
  • Switch > Port > Physical
  • Switch > Port > Trunk
  • Switch > Interface > Physical
  • Switch > Interface > Trunk
  • Switch > Interface > Port Security
  • Switch > STP > Settings
  • Switch > STP > Instances
  • Switch > Flap Guard
  • Switch > LLDP-MED > Profiles
  • Switch > LLDP-MED > Settings
  • Switch > POE
  • Switch > sFlow
  • Switch > Mirror
  • Switch > VLAN
  • Switch > Virtual Wires
  • Switch > Storm Control
  • Switch > MAC Entries
  • Switch > IP-MAC Binding
  • Switch > QoS > 802.1p
  • Switch > QoS > IP/DSCP
  • Switch > QoS > Egress Policy
  • Switch > Monitor > Forwarding Table
  • Switch > Monitor > Port Stats
  • Switch > Monitor > Spanning Tree
  • Switch > Monitor > Modules
  • Switch > Monitor > LLDP
  • Switch > Monitor > Loop Guard
  • Switch > Monitor > Flap Guard
  • Switch > Monitor > 802.1x Status

The Admin Users access control applies to the following menus:

  • System > Admin > Administrators
  • System > Admin > Profiles
  • System > Admin > Monitor
  • System > Admin > Settings

The Router Configuration access control applies to the following menus:

  • Router > Config > OSPF > Settings
  • Router > Config > OSPF > Areas
  • Router > Config > OSPF > Networks
  • Router > Config > OSPF > Interfaces
  • Router > Config > RIP > Settings
  • Router > Config > RIP > Distances
  • Router > Config > RIP > Networks
  • Router > Config > RIP > Interfaces
  • Router > Config > Static
  • Router > Config > Interface
  • Router > Config > Link Probes
  • Router > Monitor > Routing
  • Router > Monitor > Link

The Log & Report access control applies to the follow menus:

  • Log > Event Log > Link
  • Log > Event Log > POE
  • Log > Event Log > Spanning Tree
  • Log > Event Log > Switch
  • Log > Event Log > Switch Controller
  • Log > Event Log > System
  • Log > Event Log > Router
  • Log > Event Log > User
  • Log > Config