Fortinet black logo

Administration Guide

Configuring an LLDP profile for the port

Configuring an LLDP profile for the port

Configure an LLDP profile for the port. By default, the port uses the default LLDP profile.

Using the GUI:
  1. Go to Switch > LLDP-MED > Profiles.
  2. Select Add Profile.
  3. Enter a name for your LLDP profile.
  4. If needed, select Port VLAN ID.
  5. If needed, select one or more of the 802.3 TLVs: Efficient Energy Ethernet Config, PoE+ Classification, and Maximum Frame Size.
  6. If needed, select Enable for Auto-ISL.
  7. Enter the number of seconds for the Auto-ISL Hello Timer.
  8. Enter the port group number for the Auto-ISL Port Group.
  9. Enter the number of seconds for the Auto-ISL Receive Timeout.
  10. If needed, select one or more of the MED TLVs: Inventory Management, Location Identification, Network Policy, and Power Management.
  11. Select Add.
Using the CLI:

config switch lldp profile

edit <profile>

set 802.1-tlvs port-vlan-id

set 802.3-tlvs max-frame-size

set auto-isl {active | inactive}

set auto-isl-hello-timer <1-30>

set auto-isl-port-group <0-9>

set auto-isl-receive-timeout <3-90>

set auto-mclag-icl {enable | disable}

set med-tlvs (inventory-management | location-identification | network-policy | power-management)

config custom-tlvs

edit <TLVname_str>

set information-string <hex-bytes>

set oui <hex-bytes>

set subtype <integer>

next

config med-location-service

edit address-civic

set status {enable | disable}

set sys-location-id <string>

next

edit coordinates

set status {enable | disable}

set sys-location-id <string>

next

edit elin-number

set status {enable | disable}

set sys-location-id <string>

next

config med-network-policy

edit <policy_type_name>

set status {enable | disable}

set assign-vlan {enable | disable}

set dscp <0-63>

set priority <0-7>

set vlan <0-4094>

next

end

Configuring an LLDP profile for the port

Configuring an LLDP profile for the port

Configure an LLDP profile for the port. By default, the port uses the default LLDP profile.

Using the GUI:
  1. Go to Switch > LLDP-MED > Profiles.
  2. Select Add Profile.
  3. Enter a name for your LLDP profile.
  4. If needed, select Port VLAN ID.
  5. If needed, select one or more of the 802.3 TLVs: Efficient Energy Ethernet Config, PoE+ Classification, and Maximum Frame Size.
  6. If needed, select Enable for Auto-ISL.
  7. Enter the number of seconds for the Auto-ISL Hello Timer.
  8. Enter the port group number for the Auto-ISL Port Group.
  9. Enter the number of seconds for the Auto-ISL Receive Timeout.
  10. If needed, select one or more of the MED TLVs: Inventory Management, Location Identification, Network Policy, and Power Management.
  11. Select Add.
Using the CLI:

config switch lldp profile

edit <profile>

set 802.1-tlvs port-vlan-id

set 802.3-tlvs max-frame-size

set auto-isl {active | inactive}

set auto-isl-hello-timer <1-30>

set auto-isl-port-group <0-9>

set auto-isl-receive-timeout <3-90>

set auto-mclag-icl {enable | disable}

set med-tlvs (inventory-management | location-identification | network-policy | power-management)

config custom-tlvs

edit <TLVname_str>

set information-string <hex-bytes>

set oui <hex-bytes>

set subtype <integer>

next

config med-location-service

edit address-civic

set status {enable | disable}

set sys-location-id <string>

next

edit coordinates

set status {enable | disable}

set sys-location-id <string>

next

edit elin-number

set status {enable | disable}

set sys-location-id <string>

next

config med-network-policy

edit <policy_type_name>

set status {enable | disable}

set assign-vlan {enable | disable}

set dscp <0-63>

set priority <0-7>

set vlan <0-4094>

next

end