Fortinet Document Library

Version:


Table of Contents

7.0.0
Download PDF
Copy Link

Switch log messages

The log messages in this section are issues related to switching functionality.

802.1x-authenticated port using MAB is unauthorized

ID

10000

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"mac: on port <port_name> MAB mode=<status> unauthorized \"

Meaning

An 802.1x-authenticated port using MAC authentication bypass (MAB) is unauthorized.

802.1x-authenticated port using MAB is authorized

ID

10001

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"user:<user_name> mac: <MAC_address> on port<port_name> <MAB> mode=<mode> authorized set <authorization>=<status> \"

Meaning

An 802.1x-authenticated port is authorized.

No authentication on port

ID

10002

Type

Event log

Subtype

Switch

Severity

Notice

Message

No authentication on port <port_name>

Meaning

The dynamic VLAN identifier and MAC address already exist in the static MAC address entry table.

802.1x-authenticated port reset to unauthorized mode

ID

10003

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port <port_name> reset to unauthorized mode and native_vlan =<VLAN_ID> \"

Meaning

The 802.1x-authenticated port was reset to unauthorized mode and to the specified native VLAN identifier.

802.1x-authenticated port not authorized

ID

10004

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"user:<user_name> mac: <MAC_address> on port <port_name> <MAB> mode=<mode> unauthorized set <authorization_status>=<failure> \"

Meaning

The 802.1x-authenticated port is not authorized.

RADIUS CoA disconnected the 802.1x-authenticated session

ID

10005

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port session <MAC_address>: disconnected\"

Meaning

RADIUS change of authorization (CoA) was used to disconnect the 802.1x-authenticated session.

RADIUS CoA bounced the 802.1x-authenticated port

ID

10006

Type

Event log

Subtype

Switch

Severity

Notice

Message

  • msg=\"802.1x port<port_name> link down\"
  • msg=\"802.1x port<port_name> link up.\"

Meaning

RADIUS CoA was used to bounce the 802.1x-authenticated port.

RADIUS CoA disabled the 802.1x-authenticated port

ID

10007

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port <port_name> link down\"

Meaning

RADIUS CoA was used to disable the 802.1x-authenticated port.

RADIUS CoA reauthorized the 802.1x-authenticated session

ID

10008

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port session <MAC_address>: re-auth\"

Meaning

RADIUS CoA was used to reauthorize the 802.1x-authenticated session.

RADIUS CoA changed the 802.1x-authenticated session timeout

ID

10009

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port session <MAC_address>: session timeout change:<timeout_value>:\"

Meaning

RADIUS CoA was used to change the timeout setting of the 802.1x-authenticated session.

Maximum number of MAC sessions for system exceeded

ID

10010

Type

Event log

Subtype

Switch

Severity

Notice

Message

Exceed system max MAC sessions.\n

Meaning

The maximum number of MAC sessions for the system was exceeded.

MAC session counter is not synchronized

ID

10011

Type

Event log

Subtype

Switch

Severity

Notice

Message

ftnt_fswitch_resync_system_mac_session used mac session counter :<counter_ID>: not match with STA. Need to flush all interfaces.\n

Meaning

The MAC session counter is not synchronized. All interfaces must be flushed.

Dynamic ARP inspection messages

ID

10100

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\" Arp-Insp-Drop: Source interface mismatch {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"
  • msg=\" Arp-Insp-Drop: Source tuple lookup failed {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"
  • msg=\" Arp-Insp-Drop: dest interface mismatch for {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"
  • msg=\" Arp-Insp-Drop: Tuple lookup failed for vlan {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"

Meaning

  • Dynamic ARP inspection (DAI) found the source IP-MAC-address binding to be invalid.
  • DAI failed to find the source IP-MAC-address binding.
  • DAI found the destination IP-MAC-address binding to be invalid.
  • DAI failed to find the VLAN identifier for the IP-MAC-address binding.

DHCP-snooping messages

ID

10200

Type

Event log

Subtype

Switch

Severity

Notice

Message

  • msg=\"Snoop database file is corrupt. Not restoring db.\"
  • msg=\"Snoop6 database file is corrupt. Not restoring db.\"
  • msg=\"snoop dhcp-server database overflow. \"
  • msg=\"snoop database overflow. \"
  • msg=\<switch_interface>\" \"<status> \"
  • msg=\"Dhcp-Snoop: Incoming intf is not same as learned intf {in-intf=<incoming_interface>, listed-intf=<learned_interface>}.\"

Meaning

  • The DHCP-snooping database file is corrupt and cannot be restored.
  • The DHCPv6-snooping database file is corrupt and cannot be restored.
  • The DHCP-snooping server database has overflowed.
  • The DHCP-snooping client database has overflowed.
  • The interface settings have changed.
  • The incoming interface differs from the learned interface.

Packet from the IPv4 DHCP server was received on an untrusted interface

ID

10201

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"DHCP Server packet received on untrusted interface\"

Meaning

A packet from the IPv4 DHCP server was received on an untrusted interface.

Packet from the IPv6 DHCP server was received on an untrusted interface

ID

10202

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"DHCPv6 Server packet received on untrusted interface\"

Meaning

A packet from the IPv6 DHCP server was received on an untrusted interface.

Flap guard resetting port

ID

10300

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Flap Guard: Resetting <port_name>.\"
  • msg=\"Flap Guard: Retain disabled (previously triggered), putting switch port <port_number> as up\"

Meaning

  • Flap guard is resetting the specified port so that port's state will be up.
  • Flap guard keeps the “triggered” setting for the port when the portʼs state is changed to up.

Flap guard shutting down port

ID

10301

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Flap Guard: putting switch port <port_name> as down\"
  • msg=\"Flap Guard: Retaining previously triggered switch port setting for <port_name> as down\"

Meaning

  • Flap guard is shutting down the specified port.
  • Flap guard keeps the “triggered” setting for the port when the port is shut down.

Loop guard shutting down interface

ID

10400

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Loop Guard: <loop detected or loop detected with MAC move over threshold> on <switch_interface>. Shutting down <switch_interface>.\"

Meaning

Loop guard is resetting the specified port.

Loop guard resetting interface

ID

10401

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Loop Guard: Resetting <switch_interface>.\"

Meaning

Loop guard is resetting the specified port.

Network monitoring started

ID

10500

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"network monitoring started by user.\"

Meaning

A user started network monitoring.

Network monitoring stopped

ID

10501

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"network monitoring stopped by user.\"

Meaning

A user stopped network monitoring.

Sticky MAC entries messages

ID

10600

Type

Event log

Subtype

Switch

Severity

Warning or notice

Message

  • msg=\"The number of saved Sticky MAC (<number_of_ entries>) entries exceeds the learning limit (<learning_limit>) for VLAN ID <VLAN_ID>\"
  • msg=\"Sticky MAC entries saved = <number_of_entries>.\"
  • msg=\"Warning: Large number of Sticky MAC (<number_of_entries>) entries saved. Some entries may fail to load on reboot.\"
  • msg=\"Unsaved Sticky MAC entries flushed = <number_of_entries>.\"

Meaning

  • The number of saved sticky MAC entries for the specified VLAN has exceeded the MAC address learning limit.
  • The specified number of sticky MAC entries have been saved.
  • Too many sticky MAC entries have been saved, and some might be lost when the switch is rebooted.
  • Unsaved sticky MAC entries have been deleted.

Sticky MAC entries cannot be saved

ID

10601

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Warning: <number_of_MAC_addresses> sticky MACs could not be saved because the static-MAC table is full.\"
  • msg=\"Warning: <number_of_MAC_addresses> sticky MACs could not be saved due to learning limit restrictions.\"

Meaning

The specified number of sticky MAC addresses cannot be saved either because the static MAC address table is full or because the MAC address learning limit has been reached.

Static MAC entries exceeds the learning limit

ID

10700

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"The number of saved Static MAC (<number_of_entries>) entries exceeds the learning limit (<learning_limit>) for switch interface <switch_interface>.\"

Meaning

The number of saved static MAC addresses exceeds the MAC address learning limit for the specified switch interface.

Deleting or adding an access VLAN failed

ID

10750

Type

Event log

Subtype

Switch

Severity

Error or information

Message

  • msg=\"Access vlan delete failed\"
  • msg=\"Access vlan delete failed entry-id <VLAN_ID>\"
  • msg=\"Access vlan add failed\"
  • msg=\"Access vlan add failed entry-id VLAN_ID>\"
  • msg=\"The Mirror auto-configuration session \'<mirror_session>\' with collector IP <IP_address> has begun auto-configuration.\"

Meaning

  • Deleting an access VLAN failed.
  • Adding an access VLAN failed.
  • The automatic mirror configuration has started.

Automatic mirror configuration failed

ID

10751

Type

Event log

Subtype

Switch

Severity

Critical

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' failed to resolve.\"

Meaning

The automatic mirror configuration has failed.

Automatic mirror configuration completed

ID

10752

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' with collector IP <IP_address> has successfully been autoconfigured.\"

Meaning

The automatic mirror configuration has failed.

Mirroring might be interrupted

ID

10753

Type

Event log

Subtype

Switch

Severity

Critical

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' is recalculating. Mirroring may be interrupted.\"

Meaning

Mirroring might be interrupting while the automatic mirror configuration is recalculating.

Automatic mirror configuration stopping

ID

10754

Type

Event log

Subtype

Switch

Severity

Critical

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' is stopping.\"

Meaning

The automatic mirror configuration is stopping.

FortiGate nonblocking authentication daemon crashed

ID

10900

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Session is NULL, sock is <status>\"
  • msg=\"session is <session_number>, TAC+ server num is <server_number>, sock is <status>\"

Meaning

The FortiGate nonblocking authentication daemon crashed.

New MAC address learned

ID

11100

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"new <MAC_address> learned\"

Meaning

A new MAC address has been learned.

MAC address moved

ID

11101

Type

Event log

Subtype

Switch

Severity

Information

Message

  • msg=\"<MAC_address> moved new interface\"
  • msg=\"<MAC_address> deleted from old interface\"

Meaning

The MAC address is moved to a new switch interface and deleted from the old switch interface.

MAC address deleted

ID

11102

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"<MAC_address> deleted\"

Meaning

The MAC address is deleted when the mac-aging-interval is reached.

Bounced switch port now up

ID

11111

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"Bounce port: putting switch port <port_name> as up\"

Meaning

The bounced switch port is now up.

Bounced switch port now down

ID

11112

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"Bounce port: putting switch port <port_name> as down\"

Meaning

The bounced switch port is now down.

IGMP-snooping group not added

ID

11120

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg="IGMP Snooping: unable to program to hw"

Meaning

The IGMP-snooping group was not added to the hardware table because of a hash collision.

VLAN list for ring port no longer includes MRP VLAN

ID

11250

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"The VLAN list for ring-port <port_name> has been changed and no longer includes MRP VLAN <VLAN_ID>.\"

Meaning

The VLAN list for the ring port no longer includes the VLAN specified for the MRP network.

Ring ports 1 and 2 do not have the same VLAN list

ID

11251

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"MRP ring-port1 and ring-port2 don't have the same vlan list.\"

Meaning

Ring port 1 and ring port 2 must have the same VLAN list.

MRP ring is open

ID

11252

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Ring Open detected.\"

Meaning

The MRP ring is open. Each ring port must be connected to another ring port.

MRP ring is closed

ID

11253

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Ring Close detected.\"

Meaning

The MRP ring is closed.

MRP switch changed from automanager to manager

ID

11254

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP role changed from automanager to manager.\"

Meaning

The MRP switch that was assigned the role of automanager has changed to the role of manager.

MRP switch changed from automanager to client

ID

11255

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP role changed from automanager to client.\"

Meaning

The MRP switch that was assigned the role of automanager has changed to the role of client.

MRP was restarted

ID

11256

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"restart MRP due to trunk with ring port changed.\"

Meaning

The MRP was restarted because a trunk with an MRP ring port changed.

MRP status changed

ID

11257

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP is <status>.\"

Meaning

The MRP status changed.

MRP VLAN not included in ring ports

ID

11258

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Trunk and Ring port association is changed; MRP vlan is not in ring ports.\"

Meaning

The trunk and MRP ring-port association changed, and the MRP VLAN is no longer included in the ring-port configuration.

MRP ring port changed state

ID

11259

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP ring port <port_name> change state to <state>.\"

Meaning

The specified MRP ring port changed state.

Switch log messages

The log messages in this section are issues related to switching functionality.

802.1x-authenticated port using MAB is unauthorized

ID

10000

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"mac: on port <port_name> MAB mode=<status> unauthorized \"

Meaning

An 802.1x-authenticated port using MAC authentication bypass (MAB) is unauthorized.

802.1x-authenticated port using MAB is authorized

ID

10001

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"user:<user_name> mac: <MAC_address> on port<port_name> <MAB> mode=<mode> authorized set <authorization>=<status> \"

Meaning

An 802.1x-authenticated port is authorized.

No authentication on port

ID

10002

Type

Event log

Subtype

Switch

Severity

Notice

Message

No authentication on port <port_name>

Meaning

The dynamic VLAN identifier and MAC address already exist in the static MAC address entry table.

802.1x-authenticated port reset to unauthorized mode

ID

10003

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port <port_name> reset to unauthorized mode and native_vlan =<VLAN_ID> \"

Meaning

The 802.1x-authenticated port was reset to unauthorized mode and to the specified native VLAN identifier.

802.1x-authenticated port not authorized

ID

10004

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"user:<user_name> mac: <MAC_address> on port <port_name> <MAB> mode=<mode> unauthorized set <authorization_status>=<failure> \"

Meaning

The 802.1x-authenticated port is not authorized.

RADIUS CoA disconnected the 802.1x-authenticated session

ID

10005

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port session <MAC_address>: disconnected\"

Meaning

RADIUS change of authorization (CoA) was used to disconnect the 802.1x-authenticated session.

RADIUS CoA bounced the 802.1x-authenticated port

ID

10006

Type

Event log

Subtype

Switch

Severity

Notice

Message

  • msg=\"802.1x port<port_name> link down\"
  • msg=\"802.1x port<port_name> link up.\"

Meaning

RADIUS CoA was used to bounce the 802.1x-authenticated port.

RADIUS CoA disabled the 802.1x-authenticated port

ID

10007

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port <port_name> link down\"

Meaning

RADIUS CoA was used to disable the 802.1x-authenticated port.

RADIUS CoA reauthorized the 802.1x-authenticated session

ID

10008

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port session <MAC_address>: re-auth\"

Meaning

RADIUS CoA was used to reauthorize the 802.1x-authenticated session.

RADIUS CoA changed the 802.1x-authenticated session timeout

ID

10009

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"802.1x port session <MAC_address>: session timeout change:<timeout_value>:\"

Meaning

RADIUS CoA was used to change the timeout setting of the 802.1x-authenticated session.

Maximum number of MAC sessions for system exceeded

ID

10010

Type

Event log

Subtype

Switch

Severity

Notice

Message

Exceed system max MAC sessions.\n

Meaning

The maximum number of MAC sessions for the system was exceeded.

MAC session counter is not synchronized

ID

10011

Type

Event log

Subtype

Switch

Severity

Notice

Message

ftnt_fswitch_resync_system_mac_session used mac session counter :<counter_ID>: not match with STA. Need to flush all interfaces.\n

Meaning

The MAC session counter is not synchronized. All interfaces must be flushed.

Dynamic ARP inspection messages

ID

10100

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\" Arp-Insp-Drop: Source interface mismatch {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"
  • msg=\" Arp-Insp-Drop: Source tuple lookup failed {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"
  • msg=\" Arp-Insp-Drop: dest interface mismatch for {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"
  • msg=\" Arp-Insp-Drop: Tuple lookup failed for vlan {mac=<MAC_address>, vlan=<VLAN_ID>, ip= <IP_address>}.\"

Meaning

  • Dynamic ARP inspection (DAI) found the source IP-MAC-address binding to be invalid.
  • DAI failed to find the source IP-MAC-address binding.
  • DAI found the destination IP-MAC-address binding to be invalid.
  • DAI failed to find the VLAN identifier for the IP-MAC-address binding.

DHCP-snooping messages

ID

10200

Type

Event log

Subtype

Switch

Severity

Notice

Message

  • msg=\"Snoop database file is corrupt. Not restoring db.\"
  • msg=\"Snoop6 database file is corrupt. Not restoring db.\"
  • msg=\"snoop dhcp-server database overflow. \"
  • msg=\"snoop database overflow. \"
  • msg=\<switch_interface>\" \"<status> \"
  • msg=\"Dhcp-Snoop: Incoming intf is not same as learned intf {in-intf=<incoming_interface>, listed-intf=<learned_interface>}.\"

Meaning

  • The DHCP-snooping database file is corrupt and cannot be restored.
  • The DHCPv6-snooping database file is corrupt and cannot be restored.
  • The DHCP-snooping server database has overflowed.
  • The DHCP-snooping client database has overflowed.
  • The interface settings have changed.
  • The incoming interface differs from the learned interface.

Packet from the IPv4 DHCP server was received on an untrusted interface

ID

10201

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"DHCP Server packet received on untrusted interface\"

Meaning

A packet from the IPv4 DHCP server was received on an untrusted interface.

Packet from the IPv6 DHCP server was received on an untrusted interface

ID

10202

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"DHCPv6 Server packet received on untrusted interface\"

Meaning

A packet from the IPv6 DHCP server was received on an untrusted interface.

Flap guard resetting port

ID

10300

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Flap Guard: Resetting <port_name>.\"
  • msg=\"Flap Guard: Retain disabled (previously triggered), putting switch port <port_number> as up\"

Meaning

  • Flap guard is resetting the specified port so that port's state will be up.
  • Flap guard keeps the “triggered” setting for the port when the portʼs state is changed to up.

Flap guard shutting down port

ID

10301

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Flap Guard: putting switch port <port_name> as down\"
  • msg=\"Flap Guard: Retaining previously triggered switch port setting for <port_name> as down\"

Meaning

  • Flap guard is shutting down the specified port.
  • Flap guard keeps the “triggered” setting for the port when the port is shut down.

Loop guard shutting down interface

ID

10400

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Loop Guard: <loop detected or loop detected with MAC move over threshold> on <switch_interface>. Shutting down <switch_interface>.\"

Meaning

Loop guard is resetting the specified port.

Loop guard resetting interface

ID

10401

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Loop Guard: Resetting <switch_interface>.\"

Meaning

Loop guard is resetting the specified port.

Network monitoring started

ID

10500

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"network monitoring started by user.\"

Meaning

A user started network monitoring.

Network monitoring stopped

ID

10501

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"network monitoring stopped by user.\"

Meaning

A user stopped network monitoring.

Sticky MAC entries messages

ID

10600

Type

Event log

Subtype

Switch

Severity

Warning or notice

Message

  • msg=\"The number of saved Sticky MAC (<number_of_ entries>) entries exceeds the learning limit (<learning_limit>) for VLAN ID <VLAN_ID>\"
  • msg=\"Sticky MAC entries saved = <number_of_entries>.\"
  • msg=\"Warning: Large number of Sticky MAC (<number_of_entries>) entries saved. Some entries may fail to load on reboot.\"
  • msg=\"Unsaved Sticky MAC entries flushed = <number_of_entries>.\"

Meaning

  • The number of saved sticky MAC entries for the specified VLAN has exceeded the MAC address learning limit.
  • The specified number of sticky MAC entries have been saved.
  • Too many sticky MAC entries have been saved, and some might be lost when the switch is rebooted.
  • Unsaved sticky MAC entries have been deleted.

Sticky MAC entries cannot be saved

ID

10601

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Warning: <number_of_MAC_addresses> sticky MACs could not be saved because the static-MAC table is full.\"
  • msg=\"Warning: <number_of_MAC_addresses> sticky MACs could not be saved due to learning limit restrictions.\"

Meaning

The specified number of sticky MAC addresses cannot be saved either because the static MAC address table is full or because the MAC address learning limit has been reached.

Static MAC entries exceeds the learning limit

ID

10700

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"The number of saved Static MAC (<number_of_entries>) entries exceeds the learning limit (<learning_limit>) for switch interface <switch_interface>.\"

Meaning

The number of saved static MAC addresses exceeds the MAC address learning limit for the specified switch interface.

Deleting or adding an access VLAN failed

ID

10750

Type

Event log

Subtype

Switch

Severity

Error or information

Message

  • msg=\"Access vlan delete failed\"
  • msg=\"Access vlan delete failed entry-id <VLAN_ID>\"
  • msg=\"Access vlan add failed\"
  • msg=\"Access vlan add failed entry-id VLAN_ID>\"
  • msg=\"The Mirror auto-configuration session \'<mirror_session>\' with collector IP <IP_address> has begun auto-configuration.\"

Meaning

  • Deleting an access VLAN failed.
  • Adding an access VLAN failed.
  • The automatic mirror configuration has started.

Automatic mirror configuration failed

ID

10751

Type

Event log

Subtype

Switch

Severity

Critical

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' failed to resolve.\"

Meaning

The automatic mirror configuration has failed.

Automatic mirror configuration completed

ID

10752

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' with collector IP <IP_address> has successfully been autoconfigured.\"

Meaning

The automatic mirror configuration has failed.

Mirroring might be interrupted

ID

10753

Type

Event log

Subtype

Switch

Severity

Critical

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' is recalculating. Mirroring may be interrupted.\"

Meaning

Mirroring might be interrupting while the automatic mirror configuration is recalculating.

Automatic mirror configuration stopping

ID

10754

Type

Event log

Subtype

Switch

Severity

Critical

Message

msg=\"The Mirror auto-configuration session \'<mirror_session>\' is stopping.\"

Meaning

The automatic mirror configuration is stopping.

FortiGate nonblocking authentication daemon crashed

ID

10900

Type

Event log

Subtype

Switch

Severity

Warning

Message

  • msg=\"Session is NULL, sock is <status>\"
  • msg=\"session is <session_number>, TAC+ server num is <server_number>, sock is <status>\"

Meaning

The FortiGate nonblocking authentication daemon crashed.

New MAC address learned

ID

11100

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"new <MAC_address> learned\"

Meaning

A new MAC address has been learned.

MAC address moved

ID

11101

Type

Event log

Subtype

Switch

Severity

Information

Message

  • msg=\"<MAC_address> moved new interface\"
  • msg=\"<MAC_address> deleted from old interface\"

Meaning

The MAC address is moved to a new switch interface and deleted from the old switch interface.

MAC address deleted

ID

11102

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"<MAC_address> deleted\"

Meaning

The MAC address is deleted when the mac-aging-interval is reached.

Bounced switch port now up

ID

11111

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"Bounce port: putting switch port <port_name> as up\"

Meaning

The bounced switch port is now up.

Bounced switch port now down

ID

11112

Type

Event log

Subtype

Switch

Severity

Information

Message

msg=\"Bounce port: putting switch port <port_name> as down\"

Meaning

The bounced switch port is now down.

IGMP-snooping group not added

ID

11120

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg="IGMP Snooping: unable to program to hw"

Meaning

The IGMP-snooping group was not added to the hardware table because of a hash collision.

VLAN list for ring port no longer includes MRP VLAN

ID

11250

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"The VLAN list for ring-port <port_name> has been changed and no longer includes MRP VLAN <VLAN_ID>.\"

Meaning

The VLAN list for the ring port no longer includes the VLAN specified for the MRP network.

Ring ports 1 and 2 do not have the same VLAN list

ID

11251

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"MRP ring-port1 and ring-port2 don't have the same vlan list.\"

Meaning

Ring port 1 and ring port 2 must have the same VLAN list.

MRP ring is open

ID

11252

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Ring Open detected.\"

Meaning

The MRP ring is open. Each ring port must be connected to another ring port.

MRP ring is closed

ID

11253

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Ring Close detected.\"

Meaning

The MRP ring is closed.

MRP switch changed from automanager to manager

ID

11254

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP role changed from automanager to manager.\"

Meaning

The MRP switch that was assigned the role of automanager has changed to the role of manager.

MRP switch changed from automanager to client

ID

11255

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP role changed from automanager to client.\"

Meaning

The MRP switch that was assigned the role of automanager has changed to the role of client.

MRP was restarted

ID

11256

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"restart MRP due to trunk with ring port changed.\"

Meaning

The MRP was restarted because a trunk with an MRP ring port changed.

MRP status changed

ID

11257

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP is <status>.\"

Meaning

The MRP status changed.

MRP VLAN not included in ring ports

ID

11258

Type

Event log

Subtype

Switch

Severity

Warning

Message

msg=\"Trunk and Ring port association is changed; MRP vlan is not in ring ports.\"

Meaning

The trunk and MRP ring-port association changed, and the MRP VLAN is no longer included in the ring-port configuration.

MRP ring port changed state

ID

11259

Type

Event log

Subtype

Switch

Severity

Notice

Message

msg=\"MRP ring port <port_name> change state to <state>.\"

Meaning

The specified MRP ring port changed state.