Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Devices Managed by FortiOS

Configuring ports using the GUI

You can use the WiFi & Switch Controller > FortiSwitch Ports page to do the following with FortiSwitch switch ports:

  • Set the native VLAN and add more VLANs
  • Edit the description of the port
  • Enable or disable the port
  • Set the access mode to network access control (NAC) or normal
  • Enable or disable PoE for the port
  • Enable or disable DHCP snooping (if supported by the port)
  • Enable or disable whether a port is an edge port
  • Enable or disable STP (if supported by the port)
  • Enable or disable loop guard (if supported by the port)
  • Enable or disable STP BPDU guard (if supported by the port)
  • Enable or disable STP root guard (if supported by the port)

Configuring ports using the GUI

You can use the WiFi & Switch Controller > FortiSwitch Ports page to do the following with FortiSwitch switch ports:

  • Set the native VLAN and add more VLANs
  • Edit the description of the port
  • Enable or disable the port
  • Set the access mode to network access control (NAC) or normal
  • Enable or disable PoE for the port
  • Enable or disable DHCP snooping (if supported by the port)
  • Enable or disable whether a port is an edge port
  • Enable or disable STP (if supported by the port)
  • Enable or disable loop guard (if supported by the port)
  • Enable or disable STP BPDU guard (if supported by the port)
  • Enable or disable STP root guard (if supported by the port)