Fortinet Document Library

Version:


Table of Contents

Administration Guide

20.4.0
Download PDF
Copy Link

Enabling and disabling auto topology

Use the auto topology feature to automatically form an inter-switch link (ISL) between two switches. The switches must have automatic topology enabled under the config switch auto-network command.

To enable auto topology:
  1. Go to Switch > Switches.
  2. Select one or more switches.
  3. Select Config Auto Topology.

  4. Select Enable.
  5. Select Save.

    You can see the ISLs on the Topology page after selecting On for Show Inter-Switch-Link Network.

Enabling and disabling auto topology

Use the auto topology feature to automatically form an inter-switch link (ISL) between two switches. The switches must have automatic topology enabled under the config switch auto-network command.

To enable auto topology:
  1. Go to Switch > Switches.
  2. Select one or more switches.
  3. Select Config Auto Topology.

  4. Select Enable.
  5. Select Save.

    You can see the ISLs on the Topology page after selecting On for Show Inter-Switch-Link Network.