Request Tracker is an open source issue tracking and workflow platform used to coordinate tasks and manage requests among a community of users.
This document provides information about the Request Tracker connector, which facilitates automated interactions with Request Tracker using FortiSOAR™ playbooks. Add the Request Tracker connector as a step in FortiSOAR™ playbooks and perform automated ticket management on Request tracker by implementing operations, such as creating and updating a ticket on Request Tracker and retrieving the history of a ticket from Request Tracker.
Connector Version: 2.1.0
FortiSOAR™ Version Tested on: 4.12.1-253
Authored By: Fortinet
Certified: Yes
Following enhancements have been made to the Request Tracker Connector in version 2.1.0:
Added the following new operations and playbooks:
Get Transaction Attachments
Get Transaction Details
Get Attachment Details
Added the Get Transactions and Create Attachment input parameters to the Get Ticket Properties operation.
All connectors provided by FortiSOAR™ are delivered using a FortiSOAR™ repository. Therefore, you must set up your FortiSOAR™ repository and use the yum
command to install connectors:
yum install cyops-connector-request-tracker
For the detailed procedure to install a connector, click here.
For the procedure to configure a connector, click here.
In FortiSOAR™, on the Connectors page, click the Request Tracker connector row, and in the Configure tab enter the required configuration details.
Parameter | Description |
---|---|
Server URL | URL of the Request Tracker server to which you will connect and perform automated operations. |
Authentication | Type of authentication used to connect to the Request Tracker server to which you will connect and perform automated operations. You can choose either Token or Username/Password. |
Token | If you choose the authentication type as Token, then specify the API token that is configured for your account to access the Request Tracker server to which you will connect and perform the automated operations. |
Username | If you choose the authentication type as Username/Password, then specify the username that is used to access the Request Tracker server to which you will connect and perform the automated operations. |
Password | If you choose the authentication type as Username/Password, then specify the password that is used to access the Request Tracker server to which you will connect and perform the automated operations. |
Verify SSL | Specifies whether the SSL certificate for the server is to be verified or not. By default, this option is set as True . |
The following automated operations can be included in playbooks, and you can also use the annotations to access operations from FortiSOAR™ release 4.10.0 onwards:
Function | Description | Annotation and Category |
---|---|---|
Create Ticket | Creates a ticket in Request Tracker based on input parameters you have specified. | create_ticket Investigation |
Get Ticket Properties | Retrieves the properties of an existing ticket from Request Tracker based on ticket ID and other input parameters you have specified. | get_ticket_properties Investigation |
Get Ticket/Queue History | Retrieves the history details of an existing ticket or queue from Request Tracker based on ticket or queue ID and other input parameters you have specified. | get_record_history Investigation |
Search Ticket | Searches for a ticket in Request Tracker based on the query and other input parameters you have specified. | search_record Investigation |
Comment Ticket | Adds a comment to an existing ticket on Request Tracker based on ticket ID you have specified. | comment_ticket Investigation |
Update Ticket | Updates an existing ticket on Request Tracker based on input parameters you have specified. | update_ticket Investigation |
Delete Ticket | Deletes an existing ticket from Request Tracker based on ticket ID you have specified. | delete_ticket Investigation |
Create Queue | Creates a queue in Request Tracker based on input parameters you have specified. | create_queue Investigation |
List Queue | Retrieves all queues from Request Tracker. | list_queue Investigation |
Get Queue Properties | Retrieves the properties of an existing queue from Request Tracker based on queue ID you have specified. | get_queue_properties Investigation |
Update Queue | Updates an existing queue on Request Tracker based on input parameters you have specified. | update_queue Containment |
Delete Queue | Deletes an existing queue from Request Tracker based on input parameters you have specified. | delete_queue Investigation |
Get Transaction Attachments | Retrieves all attachments for a specified transaction from Request Tracker based on the transaction ID and other input parameters you have specified. | get_transaction_attachments Investigation |
Get Transaction Details | Retrieves the details for a specified transaction from Request Tracker based on the transaction ID you have specified. | get_transaction_details Investigation |
Get Attachment Details | Retrieves the details for a specified attachment from Request Tracker based on the attachment ID you have specified. | get_attachment_details Investigation |
Parameter | Description |
---|---|
Queue ID | ID of the queue in Request Tracker in which you want to create a new ticket. |
Subject | Subject of the ticket that you want to create in Request Tracker. |
From | Email ID of the user from whose ID you want to create a ticket in Request Tracker. For example, user1@example.com |
To | Email ID of the user on whose ID you want to send the ticket that you are creating on Request Tracker. For example, rt@example.com |
Content | Content or brief description of the ticket that you want to create in Request Tracker. |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the ticket that you want to create in Request Tracker. For example, {"Severity": "Low"} |
The output contains the following populated JSON schema:
{
"type": "",
"id": "",
"_url": ""
}
Parameter | Description |
---|---|
Ticket ID | ID of the ticket whose properties you want to retrieve from Request Tracker. |
Get Transactions | (Optional) Select this option to retrieve all transactions details for the ticket you have specified. |
Create Attachment | (Optional) Select this option to create attachments in FortiSOAR™ for the ticket you have specified. |
The output contains the following populated JSON schema:
{
"LastUpdated": "",
"Resolved": "",
"FinalPriority": "",
"CustomFields": {},
"TimeWorked": "",
"Type": "",
"RT::CustomRole-1": [],
"Subject": "",
"id": "",
"TimeEstimated": "",
"Due": "",
"Created": "",
"Priority": "",
"InitialPriority": "",
"_hyperlinks": [
{
"ref": "",
"_url": "",
"id": ""
}
],
"EffectiveId": {
"type": "",
"_url": "",
"id": ""
},
"Requestor": [],
"LastUpdatedBy": {
"type": "",
"_url": "",
"id": ""
},
"Started": "",
"Owner": {
"type": "",
"_url": "",
"id": ""
},
"TimeLeft": "",
"Attachment": {
"cyops_attachment_ids": [],
"rt_attachment_meta": [{"filename": "", "attachment_id": ""}]
},
"AdminCc": [],
"RT::CustomRole-2": [],
"Cc": [],
"Status": "",
"Queue": {
"type": "",
"_url": "",
"id": ""
},
"Starts": "",
"Creator": {
"type": "",
"_url": "",
"id": ""
},
"Transaction": [
{
"Creator": {
"type": "",
"_url": "",
"id": ""
},
"_hyperlinks": [
{
"ref": "self",
"_url": ""
},
{
"ref": "",
"_url": ""
}
],
"id": "",
"Created": "",
"Object": {
"type": "",
"_url": "",
"id": ""
},
"TimeTaken": "",
"Type": ""
}
]
}
Parameter | Description |
---|---|
Ticket/Queue | Select the record type, either ticket or queue, for which you want to retrieve the history details from Request Tracker. |
ID | ID of the ticket or queue whose history you want to retrieve from Request Tracker. |
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"page": ""
,
"per_page": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
],
"total": ""
}
Parameter | Description |
---|---|
Query | Query based on which you want to search for tickets in Request Tracker. For example, If you want to find all tickets that have no owner and whose status is new or open, you can add the following query: Owner = 'Nobody' AND ( Status = 'new' OR Status = 'open' ) |
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"page": ""
,
"per_page": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
],
"total": ""
}
Parameter | Description |
---|---|
Ticket ID | ID of the ticket that you want to update in Request Tracker. |
Content | Content of brief description of the ticket that you want to update in Request Tracker. |
Subject | (Optional) Subject of the ticket that you want to update in Request Tracker. |
From | (Optional) Email ID of the user from whose ID you want to update the ticket in Request Tracker. For example, user1@example.com |
To | (Optional) Email ID of the user on whose ID you want to send the ticket that you are updating on Request Tracker. For example, rt@example.com |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the ticket that you want to update in Request Tracker. For example, {"Severity": "Low"} |
No output schema is available at this time.
Parameter | Description |
---|---|
Ticket ID | ID of the ticket in Request Tracker to which you want to add a comment. |
Comment Text | Content of the comment that you want to add to an existing ticket in Request Tracker. |
The output contains a non-dictionary value.
Parameter | Description |
---|---|
Ticket ID | ID of the ticket that you want to delete from Request Tracker. |
The output contains a non-dictionary value.
Parameter | Description |
---|---|
Name | Name of the queue that you want to create in Request Tracker. |
Subject Tag | Subject of the queue that you want to create in Request Tracker. |
Description | Content or brief description of the queue that you want to create in Request Tracker. |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the queue that you want to create in Request Tracker. For example, {"Severity": "Low"} . |
The output contains the following populated JSON schema:
{
"type": "",
"id": "",
"_url": ""
}
Parameter | Description |
---|---|
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"per_page": "",
"page": ""
,
"total": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
]
}
Parameter | Description |
---|---|
Queue ID | ID of the queue whose properties you want to retrieve from Request Tracker. |
The output contains the following populated JSON schema:
{
"LastUpdated": "",
"SubjectTag": "",
"_hyperlinks": [
{
"ref": "",
"_url": ""
}
],
"id": "",
"Name": "",
"Creator": {
"type": "",
"id": "",
"_url": ""
},
"Disabled": "",
"CustomFields": {},
"SLADisabled": "",
"Lifecycle": "",
"RT::CustomRole-1": "",
"LastUpdatedBy": {
"type": "",
"id": "",
"_url": ""
},
"AdminCc": [],
"SortOrder": "",
"RT::CustomRole-2": "",
"Cc": [],
"Description": "",
"Created": ""
}
Parameter | Description |
---|---|
Queue ID | ID of the queue that you want to update in Request Tracker. |
Subject Tag | Subject of the queue that you want to update in Request Tracker. |
Description | (Optional) Content or brief description of the queue that you want to update in Request Tracker. |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the queue that you want to update in Request Tracker. For example, {"Severity": "Low"}. |
The output contains the following populated JSON schema:
{
"type": "",
"id": "",
"_url": ""
}
Parameter | Description |
---|---|
Queue ID | ID of the queue that you want to delete from Request Tracker. |
The output contains a non-dictionary value.
Parameter | Description |
---|---|
Transaction ID | ID of the transaction whose attachments you want to retrieve from Request Tracker. |
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"page": "",
"per_page": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
],
"total": ""
}
Parameter | Description |
---|---|
Transaction ID | ID of the transaction whose details you want to retrieve from Request Tracker. |
The output contains the following populated JSON schema:
{
"Creator": {
"type": "",
"id": "",
"_url": ""
},
"_hyperlinks": [
{
"ref": "",
"_url": ""
}
],
"id": "",
"Created": "",
"Object": {
"type": "",
"id": "",
"_url": ""
},
"TimeTaken": "",
"Type": ""
}
Parameter | Description |
---|---|
Ticket ID | ID of the ticket whose attachment details you want to retrieve from Request Tracker. |
Attachment ID | ID of the attachment whose details you want to retrieve from Request Tracker. |
Create Attachment | (Optional) Select this option to create the attachment in FortiSOAR™ for the attachment ID that you have specified. |
The output contains the following populated JSON schema:
{
"cyops_attachment_ids": [],
"rt_attachment_meta": []
}
The Sample - Request Tracker - 2.1.0
playbook collection comes bundled with the Request Tracker connector. This playbook contains steps using which you can perform all supported actions. You can see the bundled playbooks in the Automation > Playbooks section in FortiSOAR™ after importing the Request Tracker connector.
Note: If you are planning to use any of the sample playbooks in your environment, ensure that you clone those playbooks and move them to a different collection since the sample playbook collection gets deleted during connector upgrade and delete.
Request Tracker is an open source issue tracking and workflow platform used to coordinate tasks and manage requests among a community of users.
This document provides information about the Request Tracker connector, which facilitates automated interactions with Request Tracker using FortiSOAR™ playbooks. Add the Request Tracker connector as a step in FortiSOAR™ playbooks and perform automated ticket management on Request tracker by implementing operations, such as creating and updating a ticket on Request Tracker and retrieving the history of a ticket from Request Tracker.
Connector Version: 2.1.0
FortiSOAR™ Version Tested on: 4.12.1-253
Authored By: Fortinet
Certified: Yes
Following enhancements have been made to the Request Tracker Connector in version 2.1.0:
Added the following new operations and playbooks:
Get Transaction Attachments
Get Transaction Details
Get Attachment Details
Added the Get Transactions and Create Attachment input parameters to the Get Ticket Properties operation.
All connectors provided by FortiSOAR™ are delivered using a FortiSOAR™ repository. Therefore, you must set up your FortiSOAR™ repository and use the yum
command to install connectors:
yum install cyops-connector-request-tracker
For the detailed procedure to install a connector, click here.
For the procedure to configure a connector, click here.
In FortiSOAR™, on the Connectors page, click the Request Tracker connector row, and in the Configure tab enter the required configuration details.
Parameter | Description |
---|---|
Server URL | URL of the Request Tracker server to which you will connect and perform automated operations. |
Authentication | Type of authentication used to connect to the Request Tracker server to which you will connect and perform automated operations. You can choose either Token or Username/Password. |
Token | If you choose the authentication type as Token, then specify the API token that is configured for your account to access the Request Tracker server to which you will connect and perform the automated operations. |
Username | If you choose the authentication type as Username/Password, then specify the username that is used to access the Request Tracker server to which you will connect and perform the automated operations. |
Password | If you choose the authentication type as Username/Password, then specify the password that is used to access the Request Tracker server to which you will connect and perform the automated operations. |
Verify SSL | Specifies whether the SSL certificate for the server is to be verified or not. By default, this option is set as True . |
The following automated operations can be included in playbooks, and you can also use the annotations to access operations from FortiSOAR™ release 4.10.0 onwards:
Function | Description | Annotation and Category |
---|---|---|
Create Ticket | Creates a ticket in Request Tracker based on input parameters you have specified. | create_ticket Investigation |
Get Ticket Properties | Retrieves the properties of an existing ticket from Request Tracker based on ticket ID and other input parameters you have specified. | get_ticket_properties Investigation |
Get Ticket/Queue History | Retrieves the history details of an existing ticket or queue from Request Tracker based on ticket or queue ID and other input parameters you have specified. | get_record_history Investigation |
Search Ticket | Searches for a ticket in Request Tracker based on the query and other input parameters you have specified. | search_record Investigation |
Comment Ticket | Adds a comment to an existing ticket on Request Tracker based on ticket ID you have specified. | comment_ticket Investigation |
Update Ticket | Updates an existing ticket on Request Tracker based on input parameters you have specified. | update_ticket Investigation |
Delete Ticket | Deletes an existing ticket from Request Tracker based on ticket ID you have specified. | delete_ticket Investigation |
Create Queue | Creates a queue in Request Tracker based on input parameters you have specified. | create_queue Investigation |
List Queue | Retrieves all queues from Request Tracker. | list_queue Investigation |
Get Queue Properties | Retrieves the properties of an existing queue from Request Tracker based on queue ID you have specified. | get_queue_properties Investigation |
Update Queue | Updates an existing queue on Request Tracker based on input parameters you have specified. | update_queue Containment |
Delete Queue | Deletes an existing queue from Request Tracker based on input parameters you have specified. | delete_queue Investigation |
Get Transaction Attachments | Retrieves all attachments for a specified transaction from Request Tracker based on the transaction ID and other input parameters you have specified. | get_transaction_attachments Investigation |
Get Transaction Details | Retrieves the details for a specified transaction from Request Tracker based on the transaction ID you have specified. | get_transaction_details Investigation |
Get Attachment Details | Retrieves the details for a specified attachment from Request Tracker based on the attachment ID you have specified. | get_attachment_details Investigation |
Parameter | Description |
---|---|
Queue ID | ID of the queue in Request Tracker in which you want to create a new ticket. |
Subject | Subject of the ticket that you want to create in Request Tracker. |
From | Email ID of the user from whose ID you want to create a ticket in Request Tracker. For example, user1@example.com |
To | Email ID of the user on whose ID you want to send the ticket that you are creating on Request Tracker. For example, rt@example.com |
Content | Content or brief description of the ticket that you want to create in Request Tracker. |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the ticket that you want to create in Request Tracker. For example, {"Severity": "Low"} |
The output contains the following populated JSON schema:
{
"type": "",
"id": "",
"_url": ""
}
Parameter | Description |
---|---|
Ticket ID | ID of the ticket whose properties you want to retrieve from Request Tracker. |
Get Transactions | (Optional) Select this option to retrieve all transactions details for the ticket you have specified. |
Create Attachment | (Optional) Select this option to create attachments in FortiSOAR™ for the ticket you have specified. |
The output contains the following populated JSON schema:
{
"LastUpdated": "",
"Resolved": "",
"FinalPriority": "",
"CustomFields": {},
"TimeWorked": "",
"Type": "",
"RT::CustomRole-1": [],
"Subject": "",
"id": "",
"TimeEstimated": "",
"Due": "",
"Created": "",
"Priority": "",
"InitialPriority": "",
"_hyperlinks": [
{
"ref": "",
"_url": "",
"id": ""
}
],
"EffectiveId": {
"type": "",
"_url": "",
"id": ""
},
"Requestor": [],
"LastUpdatedBy": {
"type": "",
"_url": "",
"id": ""
},
"Started": "",
"Owner": {
"type": "",
"_url": "",
"id": ""
},
"TimeLeft": "",
"Attachment": {
"cyops_attachment_ids": [],
"rt_attachment_meta": [{"filename": "", "attachment_id": ""}]
},
"AdminCc": [],
"RT::CustomRole-2": [],
"Cc": [],
"Status": "",
"Queue": {
"type": "",
"_url": "",
"id": ""
},
"Starts": "",
"Creator": {
"type": "",
"_url": "",
"id": ""
},
"Transaction": [
{
"Creator": {
"type": "",
"_url": "",
"id": ""
},
"_hyperlinks": [
{
"ref": "self",
"_url": ""
},
{
"ref": "",
"_url": ""
}
],
"id": "",
"Created": "",
"Object": {
"type": "",
"_url": "",
"id": ""
},
"TimeTaken": "",
"Type": ""
}
]
}
Parameter | Description |
---|---|
Ticket/Queue | Select the record type, either ticket or queue, for which you want to retrieve the history details from Request Tracker. |
ID | ID of the ticket or queue whose history you want to retrieve from Request Tracker. |
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"page": ""
,
"per_page": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
],
"total": ""
}
Parameter | Description |
---|---|
Query | Query based on which you want to search for tickets in Request Tracker. For example, If you want to find all tickets that have no owner and whose status is new or open, you can add the following query: Owner = 'Nobody' AND ( Status = 'new' OR Status = 'open' ) |
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"page": ""
,
"per_page": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
],
"total": ""
}
Parameter | Description |
---|---|
Ticket ID | ID of the ticket that you want to update in Request Tracker. |
Content | Content of brief description of the ticket that you want to update in Request Tracker. |
Subject | (Optional) Subject of the ticket that you want to update in Request Tracker. |
From | (Optional) Email ID of the user from whose ID you want to update the ticket in Request Tracker. For example, user1@example.com |
To | (Optional) Email ID of the user on whose ID you want to send the ticket that you are updating on Request Tracker. For example, rt@example.com |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the ticket that you want to update in Request Tracker. For example, {"Severity": "Low"} |
No output schema is available at this time.
Parameter | Description |
---|---|
Ticket ID | ID of the ticket in Request Tracker to which you want to add a comment. |
Comment Text | Content of the comment that you want to add to an existing ticket in Request Tracker. |
The output contains a non-dictionary value.
Parameter | Description |
---|---|
Ticket ID | ID of the ticket that you want to delete from Request Tracker. |
The output contains a non-dictionary value.
Parameter | Description |
---|---|
Name | Name of the queue that you want to create in Request Tracker. |
Subject Tag | Subject of the queue that you want to create in Request Tracker. |
Description | Content or brief description of the queue that you want to create in Request Tracker. |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the queue that you want to create in Request Tracker. For example, {"Severity": "Low"} . |
The output contains the following populated JSON schema:
{
"type": "",
"id": "",
"_url": ""
}
Parameter | Description |
---|---|
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"per_page": "",
"page": ""
,
"total": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
]
}
Parameter | Description |
---|---|
Queue ID | ID of the queue whose properties you want to retrieve from Request Tracker. |
The output contains the following populated JSON schema:
{
"LastUpdated": "",
"SubjectTag": "",
"_hyperlinks": [
{
"ref": "",
"_url": ""
}
],
"id": "",
"Name": "",
"Creator": {
"type": "",
"id": "",
"_url": ""
},
"Disabled": "",
"CustomFields": {},
"SLADisabled": "",
"Lifecycle": "",
"RT::CustomRole-1": "",
"LastUpdatedBy": {
"type": "",
"id": "",
"_url": ""
},
"AdminCc": [],
"SortOrder": "",
"RT::CustomRole-2": "",
"Cc": [],
"Description": "",
"Created": ""
}
Parameter | Description |
---|---|
Queue ID | ID of the queue that you want to update in Request Tracker. |
Subject Tag | Subject of the queue that you want to update in Request Tracker. |
Description | (Optional) Content or brief description of the queue that you want to update in Request Tracker. |
Custom Fields | (Optional) You can add custom fields, in the JSON format, in the queue that you want to update in Request Tracker. For example, {"Severity": "Low"}. |
The output contains the following populated JSON schema:
{
"type": "",
"id": "",
"_url": ""
}
Parameter | Description |
---|---|
Queue ID | ID of the queue that you want to delete from Request Tracker. |
The output contains a non-dictionary value.
Parameter | Description |
---|---|
Transaction ID | ID of the transaction whose attachments you want to retrieve from Request Tracker. |
Page Size | (Optional) Number of result records that you want to display on one page. By default, it is set as 20 records. However, you can increase it to 100. |
Page Number | (Optional) Page number from which you want to retrieve records. By default, it is set to 1. |
The output contains the following populated JSON schema:
{
"count": "",
"page": "",
"per_page": "",
"items": [
{
"type": "",
"id": "",
"_url": ""
}
],
"total": ""
}
Parameter | Description |
---|---|
Transaction ID | ID of the transaction whose details you want to retrieve from Request Tracker. |
The output contains the following populated JSON schema:
{
"Creator": {
"type": "",
"id": "",
"_url": ""
},
"_hyperlinks": [
{
"ref": "",
"_url": ""
}
],
"id": "",
"Created": "",
"Object": {
"type": "",
"id": "",
"_url": ""
},
"TimeTaken": "",
"Type": ""
}
Parameter | Description |
---|---|
Ticket ID | ID of the ticket whose attachment details you want to retrieve from Request Tracker. |
Attachment ID | ID of the attachment whose details you want to retrieve from Request Tracker. |
Create Attachment | (Optional) Select this option to create the attachment in FortiSOAR™ for the attachment ID that you have specified. |
The output contains the following populated JSON schema:
{
"cyops_attachment_ids": [],
"rt_attachment_meta": []
}
The Sample - Request Tracker - 2.1.0
playbook collection comes bundled with the Request Tracker connector. This playbook contains steps using which you can perform all supported actions. You can see the bundled playbooks in the Automation > Playbooks section in FortiSOAR™ after importing the Request Tracker connector.
Note: If you are planning to use any of the sample playbooks in your environment, ensure that you clone those playbooks and move them to a different collection since the sample playbook collection gets deleted during connector upgrade and delete.