Ripestat v1.0.0

About the connector

RIPEstat is a web-based interface that provides everything you ever wanted to know about the IP address space, Autonomous System Numbers (ASNs), and related information for hostnames and countries in one place.

This document provides information about the RIPEstat connector, which facilitates automated interactions with RIPEstat using FortiSOAR™ playbooks. Add the RIPEstat connector as a step in FortiSOAR™ playbooks and perform automated operations, such as retrieving a variety of information about an IP address that you have specified from RIPEstat.

Version information

Connector Version: 1.0.0

Authored By: Fortinet.

Certified: No

Installing the connector

All connectors provided by FortiSOAR™ are delivered using a FortiSOAR™ repository. Therefore, you must set up your FortiSOAR™ repository and use the yum command to install connectors:

yum install cyops-connector-ripestat

For the detailed procedure to install a connector, click here.

Configuring the connector

For the procedure to configure a connector, click here.

Actions supported by the connector

The following automated operations can be included in playbooks and you can also use the annotations to access operations from FortiSOAR™ release 4.10.0 onwards:

Included playbooks

The Sample - RIPEstat - 1.0.0 playbook collection comes bundled with the RIPEstat connector. This playbook contains steps using which you can perform all supported actions. You can see the bundled playbooks in the Automation > Playbooks section in FortiSOAR™ after importing the RIPEstat connector.

Note: If you are planning to use any of the sample playbooks in your environment, ensure that you clone those playbooks and move them to a different collection, since the sample playbook collection gets deleted during connector upgrade and delete.