About the connector
myip.ms is a very useful site for webmasters, web developers and anyone in the hosting business to get information about IP addresses, or hosting companies, etc.
This document provides information about the MYIP.MS connector, which facilitates automated interactions with MYIP.MS using FortiSOAR™ playbooks. Add the MYIP.MS connector as a step in FortiSOAR™ playbooks and perform automated operations, such as running a Whois lookup on a specified IP address or domain.
Version information
Connector Version: 1.0.0
Authored By: Fortinet
Certified: No
Installing the connector
All connectors provided by FortiSOAR™ are delivered using a FortiSOAR™ repository. Therefore, you must set up your FortiSOAR™ repository and use the yum command to install connectors:
yum install cyops-connector-myipms
For the detailed procedure to install a connector, click here
Prerequisites to configuring the connector
- You must have API ID and Key to connect MYIP.MS
- To access the FortiSOAR™ UI, ensure that port 443 is open through the firewall for the FortiSOAR™ instance.
Configuring the connector
For the procedure to configure a connector, click here
Configuration parameters
In FortiSOAR™, on the connectors page, select the MYIP.MS connector and click Configure to configure the following parameters:
| Parameter |
Description |
| API ID |
The API ID to connect MYIP.MS. |
| API Key |
The API key to connect MYIP.MS. |
| Verify SSL |
Specifies whether the SSL certificate for the server is to be verified or not.
By default, this option is set as True. |
Actions supported by the connector
The following automated operations can be included in playbooks, and you can also use the annotations to access operations from CyOPsTM release 4.10.0 and onwards:
| Function |
Description |
Annotation and Category |
| Whois Lookup |
Whois lookup for IP address or Domain. |
lookup
Investigation |
operation: Whois Lookup
Input parameters
| Parameter |
Description |
| IP address/Domain |
Specify the value of an IP address or a domain for lookup. |
Output
The output contains the following populated JSON schema:
{
"status": "",
"result": ""
}
Included playbooks
The Sample - MYIP.MS- 1.0.0 playbook collection comes bundled with the MYIP.MS connector. These playbooks contain steps using which you can perform all supported actions. You can see bundled playbooks in the Automation > Playbooks section in FortiSOAR™ after importing the MYIP.MS connector.
Note: If you are planning to use any of the sample playbooks in your environment, ensure that you clone those playbooks and move them to a different collection since the sample playbook collection gets deleted during connector upgrade and delete.
