Fortinet Document Library

Version:


Table of Contents

1.0.0
Copy Link

About the connector

HoneyDB is a database and a web site that is created to capture and display event data from HoneyPy sensors that are running on the Internet.

This document provides information about the HoneyDB connector, which facilitates automated interactions with HoneyDB using FortiSOAR™ playbooks. Add the HoneyDB connector as a step in FortiSOAR™ playbooks and perform automated operations, such as looking up an IP address in a twitter threat feed and retrieving a list of bad hosts from HoneyDB.

Version information

Connector Version: 1.0.0

Authored By: Fortinet

Certified: No

 

Installing the connector

All connectors provided by FortiSOAR™ are delivered using a FortiSOAR™ repository. Therefore, you must set up your FortiSOAR™ repository and use the yum command to install connectors:

yum install cyops-connector-honeydb

For the detailed procedure to install a connector, click here.

 

Configuring the connector

For the procedure to configure a connector, click here.

 

Actions supported by the connector

The following automated operations can be included in playbooks and you can also use the annotations to access operations from FortiSOAR™ release 4.10.0 onwards:

 

Function Description Annotation and Category
Lookup IP Looks up an IP address in a twitter threat feed. lookup_ip
Investigation
Get Bad Hosts Retrieves a list of bad hosts from HoneyDB. bad_hosts
Investigation

 

Included playbooks

The Sample - HoneyDB - 1.0.0 playbook collection comes bundled with the HoneyDB connector. This playbook contains steps using which you can perform all supported actions. You can see the bundled playbooks in the Automation > Playbooks section in FortiSOAR™ after importing the HoneyDB connector.

 

Note: If you are planning to use any of the sample playbooks in your environment, ensure that you clone those playbooks and move them to a different collection, since the sample playbook collection gets deleted during connector upgrade and delete.

 

About the connector

HoneyDB is a database and a web site that is created to capture and display event data from HoneyPy sensors that are running on the Internet.

This document provides information about the HoneyDB connector, which facilitates automated interactions with HoneyDB using FortiSOAR™ playbooks. Add the HoneyDB connector as a step in FortiSOAR™ playbooks and perform automated operations, such as looking up an IP address in a twitter threat feed and retrieving a list of bad hosts from HoneyDB.

Version information

Connector Version: 1.0.0

Authored By: Fortinet

Certified: No

 

Installing the connector

All connectors provided by FortiSOAR™ are delivered using a FortiSOAR™ repository. Therefore, you must set up your FortiSOAR™ repository and use the yum command to install connectors:

yum install cyops-connector-honeydb

For the detailed procedure to install a connector, click here.

 

Configuring the connector

For the procedure to configure a connector, click here.

 

Actions supported by the connector

The following automated operations can be included in playbooks and you can also use the annotations to access operations from FortiSOAR™ release 4.10.0 onwards:

 

Function Description Annotation and Category
Lookup IP Looks up an IP address in a twitter threat feed. lookup_ip
Investigation
Get Bad Hosts Retrieves a list of bad hosts from HoneyDB. bad_hosts
Investigation

 

Included playbooks

The Sample - HoneyDB - 1.0.0 playbook collection comes bundled with the HoneyDB connector. This playbook contains steps using which you can perform all supported actions. You can see the bundled playbooks in the Automation > Playbooks section in FortiSOAR™ after importing the HoneyDB connector.

 

Note: If you are planning to use any of the sample playbooks in your environment, ensure that you clone those playbooks and move them to a different collection, since the sample playbook collection gets deleted during connector upgrade and delete.