FireEye Malware Protection System (MPS)

• What is Discovered and Monitored
• Event Types
• Rules
• Reports
• Configuration
• Settings for Access Credentials
• Example Syslog

What is Discovered and Monitored

Protocol	Information Discovered	Metrics Collected	Used For
Syslog

Event Types

In ADMIN > Device Support > Event Types, search for "fireeye" to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

Syslog

FortiSIEM processes events from this device via syslog sent by the device. Configure the device to send syslog to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.

• For Syslog Server, or the server where the syslog should be sent, enter the IP address of your FortiSIEM virtual appliance.
• For Port, enter 514.
• Make sure that the syslog type is Common Event Format (CEF). The syslog format should be the same as that shown in the example.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting	Value
Name	<set name>
Device Type	FireEye MPS
Access Protocol	See Access Credentials
Port	See Access Credentials
Password config	See Password Configuration

Example Syslog

<164>fenotify-45640.alert: CEF:0|FireEye|MPS|6.0.0.62528|MC|malware-callback|9|rt=Apr 16 2012 15:54:41 src=192.168.26.142 spt=0 smac=00:14:f1:90:c8:01 dst=2.2.2.2 dpt=80 dmac=00:10:db:ff:50:00 cn1Label=vlan cn1=202 cn2Label=sid cn2=33335390 cs1Label=sname cs1=Trojan.Gen.MFC cs4Label=link cs4=https://10.10.10.10/event_stream/events_for_bot?ev_id\=45640 cs5Label=ccName cs5=3.3.3.3 cn3Label=ccPort cn3=80 proto=tcp cs6Label=ccChannel cs6= shost=abc.org <http://abc.org>  dvchost=ALAXFEYE01 dvc=10.10.10.10 externalId=45640