HP ProCurve Switch

• What is Discovered and Monitored
• Event Types
• Rules
• Reports
• Configuration
• Settings for Access Credentials

What is Discovered and Monitored

Protocol	Information Discovered	Metrics collected	Used for
SNMP (V1, V2c)	Host name, version, Hardware model, Network interfaces,	Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Hardware status: Power Supply, Fan, Temperature	Availability and Performance Monitoring
Telnet/SSH	Running and startup configuration	Startup configuration change, delta between running and startup configuration	Performance Monitoring, Security and Compliance
SNMP (V1, V2c)	Trunk port connectivity between switches and VLANs carried over a trunk port, End host Layer 2 port mapping: switch interface to VLAN id, end host IP/MAC address association		Topology and end-host location

Event Types

In ADMIN > Device Support > Event Types, search for "procurve" to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

• SNMP

• Telnet/SSH

SNMP

1. Go to Configuration > SNMP Community > V1/V2 Community.
2. Enter a Community Name.
3. For MIB-View, select Operator.
4. For Write-Access, leave the selection cleared.
5. Click Add.

Telnet/SSH

1. Log into the device manager for your ProCurve switch.
2. Go to Security > Device Passwords.
3. Create a user and password for Read-Write Access.
   Although FortiSIEM does not modify any configurations for your switch, Read-Write Access is needed to read the device configuration.
4. Go to Security > Authorized Addresses and add the FortiSIEM IP to Telnet/SSH.
   This is an optional step.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting	Value
Name	<set name>
Device Type	HP ProCurve
Access Protocol	See Access Credentials
Port	See Access Credentials
Password config	See Password Configuration