Fortinet black logo

External Systems Configuration Guide

Dell EqualLogic Storage

Dell EqualLogic Storage

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP

Host name, Operating system version, Hardware model, Serial number, Network interfaces, Physical Disks, Components

Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths)

Availability and Performance Monitoring

SNMP

Hardware component health: Component name (Disk, Power supply, Temperature, Fan, RAID health), Component status, Host spare ready disk count

Overall Disk health metrics: Total disk count, Active disk count, Failed disk count, Spare disk count

Availability Monitoring

SNMP

Connection metrics: Connection Count, Read request rate (IOPS), Write request rate (IOPS), Read latency, Write latency, Read volume (KBps), Write volume (KBps)

Disk performance metrics: Disk Name, Disk I/O Utilization, Disk I/O Queue, Read volume (KBps), Write volume (KBps)

Group level performance metrics: Total storage, Used storage, Reserved storage, Reserved used storage, Total volumes, Used volumes, Online volumes, Total snapshot, Used snapshot, Online snapshot

Performance Monitoring

Event Types

In ADMIN > Device Support > Event Types, search for "equallogic" to see the event types associated with this device.

Rules

In RESOURCES > Rules, search for "equallogic" in the main content panel Search... field to see the rules associated with this device.

Reports

In RESOURCES > Reports, search for "equallogic" in the main content panel Search... field to see the reports associated with this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Dell EqualLogic
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Dell EqualLogic Storage

Dell EqualLogic Storage

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP

Host name, Operating system version, Hardware model, Serial number, Network interfaces, Physical Disks, Components

Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths)

Availability and Performance Monitoring

SNMP

Hardware component health: Component name (Disk, Power supply, Temperature, Fan, RAID health), Component status, Host spare ready disk count

Overall Disk health metrics: Total disk count, Active disk count, Failed disk count, Spare disk count

Availability Monitoring

SNMP

Connection metrics: Connection Count, Read request rate (IOPS), Write request rate (IOPS), Read latency, Write latency, Read volume (KBps), Write volume (KBps)

Disk performance metrics: Disk Name, Disk I/O Utilization, Disk I/O Queue, Read volume (KBps), Write volume (KBps)

Group level performance metrics: Total storage, Used storage, Reserved storage, Reserved used storage, Total volumes, Used volumes, Online volumes, Total snapshot, Used snapshot, Online snapshot

Performance Monitoring

Event Types

In ADMIN > Device Support > Event Types, search for "equallogic" to see the event types associated with this device.

Rules

In RESOURCES > Rules, search for "equallogic" in the main content panel Search... field to see the rules associated with this device.

Reports

In RESOURCES > Reports, search for "equallogic" in the main content panel Search... field to see the reports associated with this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Dell EqualLogic
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration