- Event Types
- Settings for Access Credentials
- Comparison of Syslog and eStreamer for Security Eventing
In ADMIN > Device Support > Event Types, search for "cisco-ftd" to see the event types associated with this device.
There are no specific rules available for Cisco Firepower Threat Defense. Matches device agnostic firewall rules.
There are no specific reports available for Cisco Firepower Threat Defense. Matches device agnostic firewall rules.
Before configuring, you may want to see a comparison of Syslog and eStreamer for Security Eventing first.
Cisco Firepower Threat Defense (FTD) supports SNMPv1, v2c, and SNMPv3. Take the following steps to configure:
Login to the Firepower Management Center (FMC) GUI, and navigate to Devices > Platform Settings > (Policy) > SNMP.
Check the Enable SNMP Servers checkbox, and configure the SNMPv2 settings.
Click on the Hosts tab.
Click on Add, and specify your SNMP server settings in the Add SNMP Management Hosts window.
Deploy the policy.
For the latest configuration instructions and information, see Configuring SNMP for FTD at https://www.cisco.com/c/en/us/products/collateral/security/firepower-ngfw/white-paper-c11-741739.html.
To configure Syslog, take the following steps:
Login to the Firepower Management Center (FMC) GUI, and navigate to Device > Platform Setting > Threat Defense Policy > Syslog > Logging Destinations.
Click Add to add a Logging Filter for a specific logging destination.
From the Logging Destination drop-down list, choose the logging destination.
For the latest configuration instructions and information, see https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200479-Configure-Logging-on-FTD-via-FMC.html.
Use these Access Method Definition settings to allow FortiSIEM to access your device over SNMP. Set the Name and Community String.
|Community String||<your own>|
These are the generic settings for providing Telnet access to your device from FortiSIEM.
|User Name||A user who has permission to access the device over Telnet|
|Password||The password associated with the user|
These are the generic settings for providing SSH access to your device from FortiSIEM.
|User Name||A user who has access credentials for your device over SSH|
|Password||The password for the user|
Generally, organizations that do not currently have significant existing investment in eStreamer should use syslog rather than eStreamer to manage security event data externally.
|No customization required||Significant customization and ongoing maintenance required to accommodate changes in each release|
|Sends directly from devices||Sends from FMC, adding processing overhead|
|Support for file and malware events, connection events (including security intelligence events) and intrusion events.||Support for all event types listed in eStreamer Server Streaming.|
|Some event data can be sent only from FMC. See Data Sent Only via eStreamer, Not via Syslolog.||Includes data that cannot be sent via syslog directly from devices. See Data Send Only via eStreamer, Not via Syslog.|