Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

NetApp Data ONTAP

Supported Version

FortiSIEM supports the latest NetApp ONTAP API version listed here.

  • NetApp ONTAP API 8.2

Configuration

Setup in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials, click New to create a new credential.
    1. Follow the instructions in “Setting Credentials“ in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      SettingsDescription
      NameEnter a name for the credential.
      Device TypeNetApp DataONTAP
      Access ProtocolNetApp ONTAPI
      Transport- HTTP
      - HTTPS
      Pull Interval5 minutes
      User NameUser name for device access
      PasswordPassword for device access
      DescriptionDescription about the device
      SettingsDescription
  3. In Step 2: Enter IP Range to Credential Associations, click New to create a new mapping:
    1. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    2. Select the name of your credential in step 2 from the Credentials drop-down list.
    3. Click Save.
  4. Click the Test drop-down list and select Test Connectivity to test the connection to NetApp Data ONTAP.
  5. To see the jobs associated with DataONTAP, select ADMIN > Setup > Pull Events.
  6. To see the received events select ANALYTICS, then enter "DataONTAP" in the search box.

 

 

NetApp Data ONTAP

Supported Version

FortiSIEM supports the latest NetApp ONTAP API version listed here.

  • NetApp ONTAP API 8.2

Configuration

Setup in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials, click New to create a new credential.
    1. Follow the instructions in “Setting Credentials“ in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      SettingsDescription
      NameEnter a name for the credential.
      Device TypeNetApp DataONTAP
      Access ProtocolNetApp ONTAPI
      Transport- HTTP
      - HTTPS
      Pull Interval5 minutes
      User NameUser name for device access
      PasswordPassword for device access
      DescriptionDescription about the device
      SettingsDescription
  3. In Step 2: Enter IP Range to Credential Associations, click New to create a new mapping:
    1. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    2. Select the name of your credential in step 2 from the Credentials drop-down list.
    3. Click Save.
  4. Click the Test drop-down list and select Test Connectivity to test the connection to NetApp Data ONTAP.
  5. To see the jobs associated with DataONTAP, select ADMIN > Setup > Pull Events.
  6. To see the received events select ANALYTICS, then enter "DataONTAP" in the search box.