Fortinet black logo

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

QNAP Turbo NAS

Configuration

Setup in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials, click New to create a new credential.
    1. Follow the instructions in "Setting Credentials" in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      SettingValue
      Name<set name>
      Device TypeQNAP Turbo NAS
      Access ProtocolSee Access Credentials
      PortSee Access Credentials
      Password configSee Password Configuration
  3. In Step 2: Enter IP Range to Credential Associations, click New to create a new mapping.
    1. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    2. Select the name of your credential in step 2 from the Credentials drop-down list.
    3. Click Save.
  4. Click the Test drop-down list and select Test Connectivity to test the connection to QNAP Turbo NAS.
  5. To see the jobs associated with QNAP, select ADMIN > Setup > Pull Events.
  6. To see the received events select ANALYTICS, then enter "QNAP" in the search box.

QNAP Turbo NAS

Configuration

Setup in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials, click New to create a new credential.
    1. Follow the instructions in "Setting Credentials" in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      SettingValue
      Name<set name>
      Device TypeQNAP Turbo NAS
      Access ProtocolSee Access Credentials
      PortSee Access Credentials
      Password configSee Password Configuration
  3. In Step 2: Enter IP Range to Credential Associations, click New to create a new mapping.
    1. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    2. Select the name of your credential in step 2 from the Credentials drop-down list.
    3. Click Save.
  4. Click the Test drop-down list and select Test Connectivity to test the connection to QNAP Turbo NAS.
  5. To see the jobs associated with QNAP, select ADMIN > Setup > Pull Events.
  6. To see the received events select ANALYTICS, then enter "QNAP" in the search box.