Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

Cisco UCS Server

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

Cisco UCS API

Host name, Access IP, Hardware components - processors, chassis, blades, board, cpu, memory, storage, power supply unit, fan unit

Chassis status: Input Power, Input Avg Power, Input Max Power, Input Min Power, Output Power, Output Avg Power, Output Max Power, Output Min Power

Memory status: Temp (C), Avg Temp (C), Max Temp (C), Min Temp (C)

Processor status:  Input Current, Input Avg Current, Input Max Current, Input Min Current, Temp (C), Avg Temp (C), Max Temp (C), Min Temp (C)

Power supply status: Temp (C), Max Temp (C), Avg Temp (C), Min Temp (C),  Input 210Volt, Avg Input 210Volt, Max Input 210Volt, Min Input 210Volt, Output 12Volt, Avg Output 12Volt, Max Output 12Volt, Min Output 12Volt, Output 3V3Volt, Avg Output 3V3Volt, Max Output 3V3Volt, Min Output 3V3Volt, Output Current, Avg Output Current, Max Output Current, Min Output Current, Output Power, Avg Output Power, Max Output Power,Min Output Power

Fan status:  Fan Speed, Average Fan Speed, Max Fan Speed, Min Fan Speed

Availability and Performance Monitoring

Event Types

In ADMIN > Device Support > Event Types, search for "cisco ucs" to see the event types associated with this device. 

Reports

In RESOURCES > Reports, search for "cisco ucs" to see the reports associated with this application or device. 

Configuration

UCS XML API

FortiSIEM uses Cisco the Cisco UCS XML API to discover Cisco UCS and to collect hardware statistics. See the Cisco UCS documentation for information on how to configure your device to connect to FortiSIEM over the API.

You can configure FortiSIEM to communicate with your device, and then initiate discovery of the device. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name ucs
Device Type Cisco UCS
Access Protocol UCS API
Pull Interval (minutes) 5
Port 5988
User Name The user name you set up in your UCS server to communicate with FortiSIEM
Password The password associated with user name

Sample Cisco UCS Events

Power Supply Status Event

[PH_DEV_MON_UCS_HW_PSU_STAT]:[eventSeverity]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,[hwComponentName]=sys/chassis-1/psu-2,
[envTempdDegC]=47.764706,[envTempAvgDegC]=36.176472,[envTempMaxDegC]=47.764706,[envTempMinDegC]=25.529411,[input210Volt]=214.294113,
[input210AvgVolt]=210.784317,[input210MaxVolt]=214.294113,[input210MinVolt]=207.823532,[ouput12Volt]=12.188235,[ouput12AvgVolt]=12.109803,
[ouput12MaxVolt]=12.376471,[ouput12MinVolt]=11.905882,[ouput3V3Volt]=3.141176,[ouput3V3AvgVolt]=3.374510,[ouput3V3MaxVolt]=3.458823,
[ouput3V3MinVolt]=3.141176,[outputCurrentAmp]=15.686275,[outputCurrentAvgAmp]=20.261436,[outputCurrentMaxAmp]=24.509804,
[outputCurrentMinAmp]=15.686275,[outputPowerWatt]=191.188004,[outputPowerAvgWatt]=245.736252,[outputPowerMaxWatt]=303.344879,
[outputPowerMinWatt]=191.188004
Processor Status Event

[PH_DEV_MON_UCS_HW_PROCESSOR_STAT]:[eventSeverity]=PHL_INFO, [hostName]=machine,[hostIpAddr]=10.1.2.36,
[hwComponentName]=sys/chassis-1/blade-3/board/cpu-2,
[inputCurrentAmp]=101.101959,[inputCurrentAvgAmp]=63.420914, [inputCurrentMaxAmp]=101.101959,[inputCurrentMinAmp]=44.580391,
[envTempdDegC]=5.788235,[envTempAvgDegC]=6.216993,[envTempMaxDegC]=6.431373,[envTempMinDegC]=5.788235,
Chassis Status Event

[PH_DEV_MON_UCS_HW_CHASSIS_STAT]:[eventSeverity\]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,[hwComponentName]=sys/chassis-1,
[inputPowerWatt]=7.843137,[inputPowerAvgWatt]=7.843137,[inputPowerMaxWatt]=7.843137,[inputPowerMinWatt]=7.843137,
outputPowerWatt]=0.000000,[outputPowerAvgWatt]=0.000000,[outputPowerMaxWatt]=0.000000,[outputPowerMinWatt]=0.000000
Memory Status Event

[PH_DEV_MON_UCS_HW_MEMORY_STAT]:[eventSeverity]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,
[hwComponentName]=sys/chassis-1/blade-1/board/memarray-1/mem-9,[envTempdDegC]=51.000000,[envTempAvgDegC]=50.128208,
[envTempMaxDegC]=51.000000,[envTempMinDegC]=48.000000
Fan Status Event

[PH_DEV_MON_UCS_HW_FAN_STAT]:[eventSeverity]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,
[hwComponentName]=sys/chassis-1/fan-module-1-5/fan-2,[fanSpeed]=7800.000000,[fanSpeedAvg]=7049.000000,
[fanSpeedMax]=8550.000000,[fanSpeedMin]=2550.00000

Cisco UCS Server

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

Cisco UCS API

Host name, Access IP, Hardware components - processors, chassis, blades, board, cpu, memory, storage, power supply unit, fan unit

Chassis status: Input Power, Input Avg Power, Input Max Power, Input Min Power, Output Power, Output Avg Power, Output Max Power, Output Min Power

Memory status: Temp (C), Avg Temp (C), Max Temp (C), Min Temp (C)

Processor status:  Input Current, Input Avg Current, Input Max Current, Input Min Current, Temp (C), Avg Temp (C), Max Temp (C), Min Temp (C)

Power supply status: Temp (C), Max Temp (C), Avg Temp (C), Min Temp (C),  Input 210Volt, Avg Input 210Volt, Max Input 210Volt, Min Input 210Volt, Output 12Volt, Avg Output 12Volt, Max Output 12Volt, Min Output 12Volt, Output 3V3Volt, Avg Output 3V3Volt, Max Output 3V3Volt, Min Output 3V3Volt, Output Current, Avg Output Current, Max Output Current, Min Output Current, Output Power, Avg Output Power, Max Output Power,Min Output Power

Fan status:  Fan Speed, Average Fan Speed, Max Fan Speed, Min Fan Speed

Availability and Performance Monitoring

Event Types

In ADMIN > Device Support > Event Types, search for "cisco ucs" to see the event types associated with this device. 

Reports

In RESOURCES > Reports, search for "cisco ucs" to see the reports associated with this application or device. 

Configuration

UCS XML API

FortiSIEM uses Cisco the Cisco UCS XML API to discover Cisco UCS and to collect hardware statistics. See the Cisco UCS documentation for information on how to configure your device to connect to FortiSIEM over the API.

You can configure FortiSIEM to communicate with your device, and then initiate discovery of the device. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name ucs
Device Type Cisco UCS
Access Protocol UCS API
Pull Interval (minutes) 5
Port 5988
User Name The user name you set up in your UCS server to communicate with FortiSIEM
Password The password associated with user name

Sample Cisco UCS Events

Power Supply Status Event

[PH_DEV_MON_UCS_HW_PSU_STAT]:[eventSeverity]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,[hwComponentName]=sys/chassis-1/psu-2,
[envTempdDegC]=47.764706,[envTempAvgDegC]=36.176472,[envTempMaxDegC]=47.764706,[envTempMinDegC]=25.529411,[input210Volt]=214.294113,
[input210AvgVolt]=210.784317,[input210MaxVolt]=214.294113,[input210MinVolt]=207.823532,[ouput12Volt]=12.188235,[ouput12AvgVolt]=12.109803,
[ouput12MaxVolt]=12.376471,[ouput12MinVolt]=11.905882,[ouput3V3Volt]=3.141176,[ouput3V3AvgVolt]=3.374510,[ouput3V3MaxVolt]=3.458823,
[ouput3V3MinVolt]=3.141176,[outputCurrentAmp]=15.686275,[outputCurrentAvgAmp]=20.261436,[outputCurrentMaxAmp]=24.509804,
[outputCurrentMinAmp]=15.686275,[outputPowerWatt]=191.188004,[outputPowerAvgWatt]=245.736252,[outputPowerMaxWatt]=303.344879,
[outputPowerMinWatt]=191.188004
Processor Status Event

[PH_DEV_MON_UCS_HW_PROCESSOR_STAT]:[eventSeverity]=PHL_INFO, [hostName]=machine,[hostIpAddr]=10.1.2.36,
[hwComponentName]=sys/chassis-1/blade-3/board/cpu-2,
[inputCurrentAmp]=101.101959,[inputCurrentAvgAmp]=63.420914, [inputCurrentMaxAmp]=101.101959,[inputCurrentMinAmp]=44.580391,
[envTempdDegC]=5.788235,[envTempAvgDegC]=6.216993,[envTempMaxDegC]=6.431373,[envTempMinDegC]=5.788235,
Chassis Status Event

[PH_DEV_MON_UCS_HW_CHASSIS_STAT]:[eventSeverity\]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,[hwComponentName]=sys/chassis-1,
[inputPowerWatt]=7.843137,[inputPowerAvgWatt]=7.843137,[inputPowerMaxWatt]=7.843137,[inputPowerMinWatt]=7.843137,
outputPowerWatt]=0.000000,[outputPowerAvgWatt]=0.000000,[outputPowerMaxWatt]=0.000000,[outputPowerMinWatt]=0.000000
Memory Status Event

[PH_DEV_MON_UCS_HW_MEMORY_STAT]:[eventSeverity]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,
[hwComponentName]=sys/chassis-1/blade-1/board/memarray-1/mem-9,[envTempdDegC]=51.000000,[envTempAvgDegC]=50.128208,
[envTempMaxDegC]=51.000000,[envTempMinDegC]=48.000000
Fan Status Event

[PH_DEV_MON_UCS_HW_FAN_STAT]:[eventSeverity]=PHL_INFO,[hostName]=machine,[hostIpAddr]=10.1.2.36,
[hwComponentName]=sys/chassis-1/fan-module-1-5/fan-2,[fanSpeed]=7800.000000,[fanSpeedAvg]=7049.000000,
[fanSpeedMax]=8550.000000,[fanSpeedMin]=2550.00000