Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

Qualys QualysGuard Scanner

Configuration in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials, click New to create a new credential.
    1. Follow the instructions in "Setting Credentials" in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      Settings Description
      Name Enter a name for the credential.
      Device Type Qualys QualysGuard Scanner
      Access Protocol Qualys API
      Pull Interval 60 minutes
      Port 443
      User Name A user who has access to the vulnerability scanner over the API.
      Password Password associated with the user
      Description Description about the device
  3. In Step 2, Enter IP Range to Credential Associations, click New to create a mapping.
    1. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    2. Select the name of your credential created in step 2 from the Credentials drop-down list.
    3. Click Save.
  4. Click the Test drop-down list and select Test Connectivity to test the connection to Qualys QualysGuard Scanner.
  5. To see the jobs associated with Qualys, select ADMIN > Setup > Pull Events.
  6. To see the received events ,select ANALYTICS, then enter "Qualys" in the search box.

Qualys QualysGuard Scanner

Configuration in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials, click New to create a new credential.
    1. Follow the instructions in "Setting Credentials" in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      Settings Description
      Name Enter a name for the credential.
      Device Type Qualys QualysGuard Scanner
      Access Protocol Qualys API
      Pull Interval 60 minutes
      Port 443
      User Name A user who has access to the vulnerability scanner over the API.
      Password Password associated with the user
      Description Description about the device
  3. In Step 2, Enter IP Range to Credential Associations, click New to create a mapping.
    1. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    2. Select the name of your credential created in step 2 from the Credentials drop-down list.
    3. Click Save.
  4. Click the Test drop-down list and select Test Connectivity to test the connection to Qualys QualysGuard Scanner.
  5. To see the jobs associated with Qualys, select ADMIN > Setup > Pull Events.
  6. To see the received events ,select ANALYTICS, then enter "Qualys" in the search box.