Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

Cisco Tandeberg Telepresence Video Communication Server (VCS)

What is Discovered and Monitored

Protocol

Information discovered

Metrics collected

Used for

SNMP

Application type

System metrics: CPU utilization, Memory utilization, Disk utilization, Interface utilization, Hardware Status, Process count, Process level CPU and memory utilization, Install software change

Performance Monitoring

SSH Disk I/O monitoring

Event Types

There are no event types defined specifically for this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide

Settings for Access Credentials

SNMP Access Credentials for All Devices

Use these Access Method Definition settings to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.

Setting Value
Name <set name>
Device Type Generic
Access Protocol SNMP
Community String <your own>

SSH Access Credentials for All Devices

These are the generic settings for providing SSH access to your device from FortiSIEM.

Setting Value
Name ssh-generic
Device Type Generic
Access Protocol SSH
Port 22
User Name A user who has access credentials for your device over SSH
Password The password for the user

Cisco Tandeberg Telepresence Video Communication Server (VCS)

What is Discovered and Monitored

Protocol

Information discovered

Metrics collected

Used for

SNMP

Application type

System metrics: CPU utilization, Memory utilization, Disk utilization, Interface utilization, Hardware Status, Process count, Process level CPU and memory utilization, Install software change

Performance Monitoring

SSH Disk I/O monitoring

Event Types

There are no event types defined specifically for this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide

Settings for Access Credentials

SNMP Access Credentials for All Devices

Use these Access Method Definition settings to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.

Setting Value
Name <set name>
Device Type Generic
Access Protocol SNMP
Community String <your own>

SSH Access Credentials for All Devices

These are the generic settings for providing SSH access to your device from FortiSIEM.

Setting Value
Name ssh-generic
Device Type Generic
Access Protocol SSH
Port 22
User Name A user who has access credentials for your device over SSH
Password The password for the user