Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

MikroTik Router

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, software version, Hardware model, Network interfaces

Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths)

Availability and Performance Monitoring

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules for this device. 

Reports

There are no predefined reports for this device. 

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.  

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type MikroTik RouterOS
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

MikroTik Router

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, software version, Hardware model, Network interfaces

Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths)

Availability and Performance Monitoring

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules for this device. 

Reports

There are no predefined reports for this device. 

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.  

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type MikroTik RouterOS
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration