Fortinet black logo

External Systems Configuration Guide

Cisco 300 Series Routers

Cisco 300 Series Routers

What is Discovered and Monitored

Protocol Information Discovered Metrics collected Used for
SNMP (V1, V2c) Host name, software version, Hardware model, Network interfaces Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards, and queue lengths) Availability and Performance Monitoring

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules specifically for this device.

Reports

There are no predefined reports specifically for this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide

Settings for Access Credentials

SNMP Access Credentials for All Devices

Set these Access Method Definition values to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.

Setting Value
Name <set name>
Device Type Generic
Access Protocol SNMP
Community String <your own>

Cisco 300 Series Routers

What is Discovered and Monitored

Protocol Information Discovered Metrics collected Used for
SNMP (V1, V2c) Host name, software version, Hardware model, Network interfaces Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards, and queue lengths) Availability and Performance Monitoring

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules specifically for this device.

Reports

There are no predefined reports specifically for this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide

Settings for Access Credentials

SNMP Access Credentials for All Devices

Set these Access Method Definition values to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.

Setting Value
Name <set name>
Device Type Generic
Access Protocol SNMP
Community String <your own>