Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

Imperva Securesphere DB Monitoring Gateway

 

Configuration in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials:
    1. Follow the instructions in “Setting Credentials“ in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      Setting Value
      Name <set name>
      Device Type Imperva Securesphere DB Monitoring Gateway
      Access Protocol See Access Credentials
      Port See Access Credentials
      Password config See Password Configuration
      User Name A user who has access credentials for the device
      Password The password for the user
      Super Password Password for Super
  3. In Step 2, Enter IP Range to Credential Associations:
    1. Select the name of your credential from the Credentials drop-down list.
    2. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    3. Click Save.
  4. Click Test to test the connection to Imperva Securesphere DB Monitoring Gateway.
  5. To see the jobs associated with Imperva, select ADMIN > Pull Events.
  6. To see the received events select ANALYTICS, then enter Imperva in the search box.

Imperva Securesphere DB Monitoring Gateway

 

Configuration in FortiSIEM

Complete these steps in the FortiSIEM UI:

  1. Go to the ADMIN > Setup > Credentials tab.
  2. In Step 1: Enter Credentials:
    1. Follow the instructions in “Setting Credentials“ in the User's Guide to create a new credential.
    2. Enter these settings in the Access Method Definition dialog box:

      Setting Value
      Name <set name>
      Device Type Imperva Securesphere DB Monitoring Gateway
      Access Protocol See Access Credentials
      Port See Access Credentials
      Password config See Password Configuration
      User Name A user who has access credentials for the device
      Password The password for the user
      Super Password Password for Super
  3. In Step 2, Enter IP Range to Credential Associations:
    1. Select the name of your credential from the Credentials drop-down list.
    2. Enter a host name, an IP, or an IP range in the IP/Host Name field.
    3. Click Save.
  4. Click Test to test the connection to Imperva Securesphere DB Monitoring Gateway.
  5. To see the jobs associated with Imperva, select ADMIN > Pull Events.
  6. To see the received events select ANALYTICS, then enter Imperva in the search box.