|SNMP (V1, V2c)||Host name, Software version, Hardware model, Network interfaces||Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths)||Availability and Performance Monitoring|
|SNMP (V1, V2c)||Hardware status: Power Supply, Fan, Temperature||Availability|
|SNMP (V1, V2c, V3)||Layer 2 port mapping: associating switch ports to directly connected host IP/MAC addresses||Identity and location table; Topology|
In ADMIN > Device Support > Event, search for "alcatel" in the Device Type and Description columns to see the event types associated with this device.
There are no predefined rules for this device.
There are no predefined reports for this device.
FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.
Set these Access Method Definition values to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.
|Community String||<your own>|