Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

Cisco IronPort Mail Gateway

What is Discovered and Monitored

Protocol

Information discovered

Metrics collected

Used for

SNMP Ping Status, SNMP Ping Stat, Uptime, CPU Util, Mem Util, Net Intf Stat, Hardware Status

Syslog

Mail attributes: attributes include MID, ICID, DCID, Sender address, Receiver Address, Mail Subject, Sent Bytes, Attachment, Spam indicator, Virus indicator, Quarantine indicator, SMTP delivery failures and failure codes, mail action - pass, block, clean.

Security Monitoring and compliance

Event Types

In ADMIN > Device Support > Event, search for "ironport-mail" in the Display Name column to see the event types associated with this device. 

Rules

There are no predefined rules for this device.

Reports

In RESOURCE > Reports, search for "ironport mail" in the Name and Description columns to see the reports for this device. 

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Syslog
  1. Log in to your Ironport Mail Gateway device manager with administrator privileges. 
  2. Edit the Log Subscription settings.
  3. For Log Name, enter IronPort-Mail.
    This identifies the log to FortiSIEM as originating from an Ironport mail gateway device. 
  4. For Retrieval Method, select Syslog Push
  5. For Hostname, enter the IP address of your FortiSIEM virtual appliance.
  6. For Protocol, select UDP
Sample Parsed Ironport Mail Gateway Syslog

Tue Sep 24 11:39:49 2012 IronPort-Mail: Info: MID 200257071 ready 24663 bytes from <someone@foo.com>Sep 24 11:39:49 18.0.19.8 IronPort-Mail: Info: MID 1347076 ICID 346818 From: <john.doe@abc.com>Tue Sep 24 11:39:49 2012 IronPort-Mail: Info: Message aborted MID 200257071 Dropped by antivirus
Tue Sep 24 11:39:49 2012 IronPort-Mail: Info: Delayed: DCID 5 MID 200257071 to RID 0 - 4.1.0 - Unknown address error ('466', ['Mailbox temporarily full.'])[]

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Cisco IronPort AsyncOS Mail
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Cisco IronPort Mail Gateway

What is Discovered and Monitored

Protocol

Information discovered

Metrics collected

Used for

SNMP Ping Status, SNMP Ping Stat, Uptime, CPU Util, Mem Util, Net Intf Stat, Hardware Status

Syslog

Mail attributes: attributes include MID, ICID, DCID, Sender address, Receiver Address, Mail Subject, Sent Bytes, Attachment, Spam indicator, Virus indicator, Quarantine indicator, SMTP delivery failures and failure codes, mail action - pass, block, clean.

Security Monitoring and compliance

Event Types

In ADMIN > Device Support > Event, search for "ironport-mail" in the Display Name column to see the event types associated with this device. 

Rules

There are no predefined rules for this device.

Reports

In RESOURCE > Reports, search for "ironport mail" in the Name and Description columns to see the reports for this device. 

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Syslog
  1. Log in to your Ironport Mail Gateway device manager with administrator privileges. 
  2. Edit the Log Subscription settings.
  3. For Log Name, enter IronPort-Mail.
    This identifies the log to FortiSIEM as originating from an Ironport mail gateway device. 
  4. For Retrieval Method, select Syslog Push
  5. For Hostname, enter the IP address of your FortiSIEM virtual appliance.
  6. For Protocol, select UDP
Sample Parsed Ironport Mail Gateway Syslog

Tue Sep 24 11:39:49 2012 IronPort-Mail: Info: MID 200257071 ready 24663 bytes from <someone@foo.com>Sep 24 11:39:49 18.0.19.8 IronPort-Mail: Info: MID 1347076 ICID 346818 From: <john.doe@abc.com>Tue Sep 24 11:39:49 2012 IronPort-Mail: Info: Message aborted MID 200257071 Dropped by antivirus
Tue Sep 24 11:39:49 2012 IronPort-Mail: Info: Delayed: DCID 5 MID 200257071 to RID 0 - 4.1.0 - Unknown address error ('466', ['Mailbox temporarily full.'])[]

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Cisco IronPort AsyncOS Mail
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration