Connecting and logging into the FortiExtender 200F
Connecting and logging into the FortiExtender 200F
To connect to the FortiExtender 200F using a computer and log into the FortiExtender GUI:
- Use an Ethernet cable to connect a LAN port in the back of the FortiExtender to your computer's Ethernet port.
- Configure the computer to be on the same subnet as the FortiExtender 200F by changing its IP address to 192.168.200.100 and the netmask to 255.255.255.0.
- In a web browser, go to the default FortiExtender 200F web GUI address: http://192.168.200.99.
- In the username and password fields, enter admin, then press Enter.
Connecting and logging into the FortiExtender 200F
To connect to the FortiExtender 200F using a computer and log into the FortiExtender GUI:
- Use an Ethernet cable to connect a LAN port in the back of the FortiExtender to your computer's Ethernet port.
- Configure the computer to be on the same subnet as the FortiExtender 200F by changing its IP address to 192.168.200.100 and the netmask to 255.255.255.0.
- In a web browser, go to the default FortiExtender 200F web GUI address: http://192.168.200.99.
- In the username and password fields, enter admin, then press Enter.