File type, for example, High Risk Downloader.

Name of the virus.

Select to view the FortiGuard Encyclopedia analysis of the file if the file has a Malicious rating. This page provides analysis details, detection information, and recommended actions.

Select to mark the file as clean (false positive) or suspicious (false negative). This field is dependent on the file risk type. In the Apply Override Verdict dialog box type a comment and select Submit or Submit feedback to Cloud to send the file to the FortiGuard team for analysis.

After a file has an overridden verdict, its future rating will be the overridden one until you reset the verdict.

After a file's verdict is overridden, the job will be listed in the Scan Job > Overridden Verdicts page for easy tracking.

Export the job details to a PDF report.

Download the password protected original file (.zip format) to your management computer for further analysis. The default password for this file is fortisandbox.

Unzip the original file only on a management computer in an analysis environment.

The date and time the file was received by FortiSandbox.

The date and time the scan started and the timezone.

The status of the scan. Status: Done, Canceled, Skipped, and Timed Out.

The source of the rating decision. The following are the sources by scan module:

Static Scan related:

AV Scan Engine, Sandbox Community Cloud, Static Scan Engine, Yara Scan Engine, Dynamic Scan Cache, Allowlist/Blocklist, FortiGuard Allowlist/Blocklist, Overriden Verdicts, Al (Cloud) and Fabric Device (FortiNDR).

Dynamic Scan related:

Dynamic Scan (Al off), Dynamic Scan, Dynamic Scan (MacOS Cloud), Dynamic Scan (Cloud), Cloud Rating, Customized Rating and Real-time Zero-Day Anti-Phishing Service.

The module names have been changed since v4.2.0. If you require the previous module names for mapping, please contact Customer Support.

The input source of the file such as FortiMail.

The malware host IP address.

The IP address of the client that downloaded the virus.

The digital signature availability status of the scanned file.

Whether AI mode is on or off.

Whether Deep AI mode is on or off.

When available, the scan bypass configuration will be displayed.

The SIMNET status when the scan is running.

The URL level to do the recursive scan.

WindowsCloudVM region.

File/URL scan timeout setting.

By clicking the Virus Total link, a new page will open to query https://www.virustotal.com.

Only a limited number of queries per minute is allowed without manual interaction with the Virus Total website.

For submitted URLs, this field displays a color-coded rating for each child URL, so that you an quickly identify child URLs that have a different rating from the parent URL.

Click the link to view the original job if this one is an AV rescan or On-Demand rescan job.

View additional file information including the following: Packers, File Type,Original URL/URL, File Size, Service, MD5, SHA1, SHA256, ID, Submitted By, Submitted Filename, Filename, Scan Start Time, VM Scan Start Time, VM Scan End Time, VM Scan Time, Scan End Time, Total Scan Time, Scan Unit, Redirect URL, Embedded URL number, No VM Reason (reason why sample was not scanned inside VM), VM Reason (reason why sample entered into VM), Launched OS (VM type), Specified Browser, Launched Browser, Pipeline mode OS (if rated by pipeline mode VM ), Infected OS, Anti Evasion Triggers. Password Protected (For PDF and Office file only, showing whether the file is password protected and successfully extracted or not) and URL Category.

If the sample is from FortiMail, Email related information, such as the Email Sender, Receiver, Client IP, From, To, and Subject will also be shown.

If the sample is from Adapter, Adapter IP address and Email related information, such as BCC-Agent Sender and BCC-Agent Receiver will also be shown.

If the sample is a URL and scanned by Real-time Zero-Day Anti-Phishing Server, Real-time Zero-Day Anti-Phishing Service will also be shown. Additionally, if there is a screenshot available to download, then a download button will be shown after the URL Category.

A summary of the Malware's behavior indicators if there are any.

The rating is the final verdict of the FortiSandbox on the scan job based on the collected behavioral activities and static analysis. The assessment of their risk and impact is based on our FortiGuard Threat Intelligence of previously-known malware.

Ratings include Malware, High risk, Medium risk, Low risk, and Clean.

When Interaction mode is enabled before jobs are submitted, VM Interaction displays Raw and the Status is ON. When Interaction is disabled VM Interaction is not displayed in the Overview page.

View the following analysis details for each Detection OS that is launched during the scan. Each Detection OS's detail will be shown in a separate tab. The Infected OS will have a VM Infected icon in its tab title.

If the Malware is detected by non-Sandboxing scan, such as FortiGuard static scan, the tab title is displayed as N/A.

View the file's behavior over time and its density during its execution.

Clean behaviors: green bubble.

Suspicious behaviors: red, blue, or orange bubble.

The higher the bubble, the more serious the event is.

To view the event details, hover the mouse on top of the bubble.

If a file scan is scanned with more than one VM type, the VM tab will dynamically switch to the chart for that type.

If the file hits any imported YARA rule, a YARA tab will appear with detailed information. including:

• The hit rule
• Rule's risk level
• Rule set name
• Link to original YARA rule file

Select the Captured Packets button to download the tracer PCAP file to your management computer.The packet capture (PCAP) file contains network traffic initiated by the file. You must have a network protocol analyzer installed on your management computer to view this file.

The Captured Packets button is not available for all file types.

Download the compressed .tar file containing the tracer log and related files. The password protected /backup folder in the tracer log contains information about the program’s execution. The default password for this file is fortisandbox.

Unzip the tracer log only on a management computer in an analysis environment.

To see all dropped files by the file being scanned, use the -g argument. This generates a file named filemap.txt in the backup directory of the tracer package.

A text file containing detailed information collected inside the Sandbox VM.

Download the IOC in STIX2 format.

Displays the signatures of industrial application network traffic that are detected. Click the name to go to its FortiGuard page.

Displays IPS signatures that are detected, the signatures are displayed. Click the name to go to its FortiGuard page.

Download screenshot images when the file was running in the sandbox. This image is not always available.

If the file hits FortiSandbox internal YARA rules, detailed information is displayed.

Suspicious indicators detected by FortiGuard advanced Office file static scan engine.

Suspicious indicators detected by FortiGuard advanced Web file static scan engine.

A summary of behavior indicators, if available.

When detailed information is available below, a question mark icon is displayed. When clicked, detailed information is displayed. For some operations, such as File Operations, users can download files in a password protected ZIP format.

Displays malware's attack techniques and tactics.

The MITRE supports V11. FortiSandbox displays the supported version on the Details page.

By default, a light version is displayed. Click the toggle button to swap between the Lite Matrix and Full Matrix.

The botnet name and target IP address.

The file-related operations, includes Created/Deleted/Renamed/Modified/Set Attributes.

The registry-related operations, includes Created/Deleted.

The memory-related operations, includes Process Related/Process Created/Process Created and Injected/Written.

Users that are infected by this executable will notice HTTP connections with certain URL/IP addresses.

Click the Network Behaviors dropdown icon to view the network behavior of the file. This field may not be available for all file types.

For certain document files, if they contain malicious URLs, those URLs are displayed here. Users can select a URL to display its detailed information, like rating history and visit volume history.

For PDFs, Office and HTML files, if the file contains embedded URLs or QR code, a maximum of three URLs and three QR codes can be scanned inside VM and listed here.

For more information on how to enable sandboxing embedded URL/QR code, see the FortiSandbox CLI Reference Guide.

The executable file's behavior during execution, in time sequence.

The tracer/rating package version is displayed at the bottom of the job detail page and in the PDF Report.