Fortinet black logo

Administration Guide

Home FortiSandbox 4.2.3 Administration Guide
4.2.3
4.4.5
4.4.4
4.4.3
4.4.2
4.4.1
4.4.0
4.2.7
4.2.6
4.2.5
4.2.4
4.2.3
4.2.2
4.2.1
4.2.0
4.0.5
4.0.4
4.0.3
4.0.2
4.0.1
4.0.0
3.2.4
3.2.3
3.2.2
3.2.1
3.2.0
3.1.5
3.1.4
3.1.3
3.1.2
3.1.1
3.1.0
3.0.7
3.0.6

Cluster setup

Cluster setup

To save time configuring an HA-Cluster, review cluster pre-requisites. After you have set up the Cluster, you can configure cluster level failover IP for each port except port3 and any ports the sniffer is sniffing. You can also enable Health Check to set up a ping server and/or echo server to ensure the network condition between client devices and FortiSandbox is always up.

This section contains the following topics:

Previous
Next

Cluster setup

To save time configuring an HA-Cluster, review cluster pre-requisites. After you have set up the Cluster, you can configure cluster level failover IP for each port except port3 and any ports the sniffer is sniffing. You can also enable Health Check to set up a ping server and/or echo server to ensure the network condition between client devices and FortiSandbox is always up.

This section contains the following topics:

Previous
Next