Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Related CLI commands

The table below lists the CLI commands to administer your HA-Cluster.

hc-settings

Configure the unit as a HA-Cluster mode unit. Set or unset cluster failover IP set.

hc-status -l

List the status of HA-Cluster units.

hc-worker

-a to add that worker or secondary unit to the cluster.

-r to remove that worker or secondary unit from the cluster.

-u to update that worker or secondary unit information.

hc-primary -s<10-100>

Turn on file scan on the primary node with 10% to 100% processing capacity.

hc-primary -r<serial number>

Remove the worker or secondary unit with the specified serial number from the primary node.

After removing a worker or secondary node, use hc-status -l on the primary node to verify that the worker or secondary node has been removed.

Related CLI commands

The table below lists the CLI commands to administer your HA-Cluster.

hc-settings

Configure the unit as a HA-Cluster mode unit. Set or unset cluster failover IP set.

hc-status -l

List the status of HA-Cluster units.

hc-worker

-a to add that worker or secondary unit to the cluster.

-r to remove that worker or secondary unit from the cluster.

-u to update that worker or secondary unit information.

hc-primary -s<10-100>

Turn on file scan on the primary node with 10% to 100% processing capacity.

hc-primary -r<serial number>

Remove the worker or secondary unit with the specified serial number from the primary node.

After removing a worker or secondary node, use hc-status -l on the primary node to verify that the worker or secondary node has been removed.