Configuration commands

The following configuration commands are available:

Command

Description

show

Show the bootstrap configuration, including the port IP address (IPv4 and IPv6), network mask, port MAC address, and default gateway. If the port is being used by a sniffer, it will not be displayed.

set

Set configuration parameters.

`set admin-port <portx>`	Enable a new administrative port other than port1. It cannot be set to port3 or sniffer ports.
`set api-port`	Set ports for API connection.
`set date <date>`	Set system date, in the format of YYYY-MM-DD.
`set default-gw <ip>`	Set the default gateway address.
`set port3-speed [<auto> \| <speed full\|half>]`	Set port3 speed and duplex settings. The option `port3-speed` is not for FSA_VM.
`set port-mtu <portx> <1200-9000>`	Set a port's MTU value.
`set portX-ip <ip/netmask>`	Set the portX IP address in IP/netmask format. It can also set the address on aggregate ports.
`set time <time>`	Set system time, in the format of HH:MM:SS.

unset

Unset the admin port or the default gateway:

unset admin-port
unset api-port
unset default-gw

Configuration commands

The following configuration commands are available:

Command

Description

show

Show the bootstrap configuration, including the port IP address (IPv4 and IPv6), network mask, port MAC address, and default gateway. If the port is being used by a sniffer, it will not be displayed.

set

Set configuration parameters.

`set admin-port <portx>`	Enable a new administrative port other than port1. It cannot be set to port3 or sniffer ports.
`set api-port`	Set ports for API connection.
`set date <date>`	Set system date, in the format of YYYY-MM-DD.
`set default-gw <ip>`	Set the default gateway address.
`set port3-speed [<auto> \| <speed full\|half>]`	Set port3 speed and duplex settings. The option `port3-speed` is not for FSA_VM.
`set port-mtu <portx> <1200-9000>`	Set a port's MTU value.
`set portX-ip <ip/netmask>`	Set the portX IP address in IP/netmask format. It can also set the address on aggregate ports.
`set time <time>`	Set system time, in the format of HH:MM:SS.

unset

Unset the admin port or the default gateway:

unset admin-port
unset api-port
unset default-gw

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

Configuration commands

Configuration commands

Configuration commands

Configuration commands