Show the bootstrap configuration, including the port IP address (IPv4 and IPv6), network mask, port MAC address, and default gateway. If the port is being used by a sniffer, it will not be displayed.

Set configuration parameters.

• set portX-ip <ip/netmask> - Set the portX IP address in IP/netmask format.
• set port3-speed [<auto> | <speed full|half>] - Set port3 speed and duplex settings. The option port3-speed is not for FSA_VM.
• set port-mtu <portx> <1200-9000> - Set a port's MTU value.
• set admin-port <portx> - Enable a new administrative port other than port1. It cannot be set to port3 or sniffer ports.
• set default-gw <ip> - Set the default gateway address.
• set date <date> - Set system date, in the format of YYYY-MM-DD.
• set time <time> - Set system time, in the format of HH:MM:SS.