System Routing

The System Routing page allows you to manage static routes on your FortiSandbox device. Go to Network > System Routing to view the routing list.

The following options are available:

Create New	Select to create a new static route.
Edit	Select a static route in the list and click Edit in the toolbar to edit the entry.
Delete	Select a static route in the list and click Delete in the toolbar to delete the entry.

The following information is displayed:

IP/Mask	Displays the IP address and subnet mask.
Gateway	Displays the gateway IP address.
Device	Displays the interface associated with the static route.
Number of Routes	Displays the number of static routes configured.

To create a new static route:

1. Click Create New from the toolbar.
2. Enter a destination IP address and mask, and a gateway, in their requisite fields.

   The destination IP/Mask can be entered in the format 192.168.1.2/255.255.255.0, 192.168.1.2/24, or fe80:0:0:0:0:0:c0a8:1fe. The following subnets are reserved for use by FortiSandbox. Do not configure static routes for these IP address ranges: 192.168.56.0/24 192.168.57.0/24 192.168.250.0/24

3. Select a device (or interface) from the dropdown list.
4. Click OK to create the new static route.

To edit a static route:

1. Select a Static Route.
2. Click the Edit button.
3. Edit the destination IP address and mask, gateway, and device (or interface) as required.
4. Click OK to apply the edits to the static route.

To delete a static route or routes:

1. Select one or more Static Routes.
2. Click the Delete button from the toolbar.
3. Select Yes, I’m sure on the confirmation page to delete the selected route or routes.

Static route entries defined in this page are for system use and are not applied to traffic originating from the guest VM during a file's execution.