Before and after any firmware upgrade
Before any firmware upgrade, save a copy of your FortiSandbox configuration by going to Dashboard > System Configuration > Backup.
After any firmware upgrade, if you are using the web UI, clear the browser cache prior to login on the FortiSandbox unit to ensure proper display of the web UI screens.
Upgrading to 3.1.0
FortiSandbox 3.1.0 officially supports upgrading directly from version 3.0.4.
When upgrading from version 3.0.0 to 3.0.3, it is required to upgrade to 3.0.4 first, then to 3.1.0.
When upgrading from version 2.5.0 to 2.5.1, it is required to upgrade to 2.5.2 first, then to 3.0.0 > 3.0.4 > 3.1.0.
When upgrading from version 2.4.0, it is required to upgrade to 2.4.1 first, then to 3.0.0 > 3.0.4 > 3.1.0.
When upgrading from version 2.3.0 to 2.3.2, it is required to upgrade to 2.3.3 first, then to 2.4.1 > 2.5.2 > 3.0.0 > 3.0.4 > 3.1.0.
When upgrading from version 2.2.1 and earlier, the required upgrade path is as follows: 2.2.2 > 2.3.0 > 2.3.3 > 2.4.1 > 2.5.2 > 3.0.0 > 3.0.4 > 3.1.0.
Upgrading cluster environments
In a cluster environment, it is recommended to upgrade the cluster in the following order:
Upgrade a unit after the previous one fully boots up. After upgrade, it is highly recommended to setup a cluster level fail-over IP set, so the fail-over between Master and Primary Slave can occur smoothly.
Upgrading FortiSandbox firmware consists of the following steps:
- Download the firmware image from the Fortinet Customer Service & Support portal.
- When upgrading via the CLI, put the firmware image on a host that supports file copy with the SCP or FTP command. The FortiSandbox must be able to access the SCP or FTP server.
In a console window, enter the following command string to download and install the firmware image:
fw-upgrade -b -s<SCP/FTP server IP address> -u<user name> -t<ftp|scp> -f<file path>
- When upgrading via the Web-based Manager, go to System > Dashboard . In the System Information widget, click the Update link next to Firmware Version. The Firmware Upgrade page is displayed. Browse to the firmware image on the management computer and select the Submit button.
- Microsoft Windows Sandbox VMs must be activated against the Microsoft activation server if they have not been already. This is done automatically after a system reboot. To ensure the activation is successful, port3 of the system must be able to access the Internet and the DNS servers should be able to resolve the Microsoft activation servers.
Downgrading to previous firmware versions
Downgrading to previous firmware versions is not supported.
FortiSandbox VM firmware
Fortinet provides FortiSandbox VM firmware images for VMware ESXi and Kernel Virtual Machine (KVM) virtualization environments.
For more information, see the VM Installation Guide in the Fortinet Document Library.
Firmware image checksums
The MD5 checksums for all Fortinet software and firmware releases are available at the Fortinet Customer Service & Support portal located at https://support.fortinet.com. After logging in select Download > Firmware Image Checksums, enter the image file name including the extension, and select Get Checksum Code.