Fortinet black logo

Version:

4.4.1
4.4.0
4.2.5

Version:

4.2.4
4.2.3
4.2.2

Version:

4.2.1
4.2.0
4.0.3

Version:

4.0.2
4.0.1
4.0.0

Version:

3.2.4
3.2.3
3.2.2

Version:

3.2.1
3.2.0
3.1.5

Version:

3.1.4
3.1.3
3.1.2

Version:

3.1.1
3.1.0
3.0.7

Version:

3.0.6

Table of Contents

Administration Guide

3.0.7
4.4.1
4.4.0
4.2.5
4.2.4
4.2.3
4.2.2
4.2.1
4.2.0
4.0.3
4.0.2
4.0.1
4.0.0
3.2.4
3.2.3
3.2.2
3.2.1
3.2.0
3.1.5
3.1.4
3.1.3
3.1.2
3.1.1
3.1.0
3.0.7
3.0.6
Download PDF
Copy Doc ID 4328bfad-eef1-11eb-97f7-00505692583a:415523
Copy Link

Edit administrative access

  1. The port1 interface or any other administrative port set through the CLI command set admin-port are used for administrative access to the FortiSandbox device. HTTPS is enabled by default, but you can edit this interface to enable HTTP, SSH, and Telnet support.
  2. Edit the IP address and the access rights as required, then click OK to apply the changes.
Note

Administrative access rights can only be set on port1; all other administrative ports follow port1 settings.
Previous
Next

Edit administrative access

  1. The port1 interface or any other administrative port set through the CLI command set admin-port are used for administrative access to the FortiSandbox device. HTTPS is enabled by default, but you can edit this interface to enable HTTP, SSH, and Telnet support.
  2. Edit the IP address and the access rights as required, then click OK to apply the changes.
Note

Administrative access rights can only be set on port1; all other administrative ports follow port1 settings.
Previous
Next