Preparing network connection for FortiSandbox VM

The Private Subnet (IPv4 CIDR 10.0.1.0/24) is connected to all VM clones and FSA-VM.

To create a private subnet:

1. Click Create Subnet and configure the following information.
   • For Name tag, enter a name. For example, private_FortiSandbox.
   • For VPC, select the VPC you created.
   • For IPv4 CIDR block, enter 10.0.1.0/24 (for private subnet).

   

2. Click Yes, Create.

To create a route table:

1. Under Virtual Private Cloud, select Route Tables.
2. Click Create Route Table and configure the following. Then click Yes, Create.
   • For Name Tag, enter a name.
   • For VPC, select the VPC you created.

   

3. Go to Subnet Associations.
4. Click Edit, select the public subnet, then click Save.

   

5. Go to Routes and click Add Another Route.
   • For Destination, enter 0.0.0.0/0.
   • For Target, select the Internet Gateway for public subnet you created.
6. Click Save.
7. Repeat these steps to create a route table for your private subnet, and, if needed, for your HA-Cluster.