Configuring the second NIC on the FortiProxy-VM

After logging into the FortiProxy management GUI, you must manually configure the second NIC. Otherwise, the configuration is empty.

Go to Network > Interfaces. port2's IP address/netmask is shown as 0.0.0.0 0.0.0.
Edit port2 and enter the IP address and netmask.
Configure the remaining settings as required, then click OK.

After logging into the FortiProxy management GUI, you must manually configure the second NIC. Otherwise, the configuration is empty.

To configure the second NIC on the FortiProxy-VM:

Go to Network > Interfaces. port2's IP address/netmask is shown as 0.0.0.0 0.0.0.

Edit port2 and enter the IP address and netmask.

Configure the remaining settings as required, then click OK.