FortiLAN Cloud
Follow this procedure on the FortiLAN Cloud GUI to configure captive portal.
Adding a RADIUS Server
Select a configured AP Network and navigate to Wireless > Configuration > My RADIUS Server to configure a RADIUS profile. Click Add My RADIUS Server.
Update the configuration parameters as described in Adding a RADIUS Server.
Notes:
-
The Primary Server Secret should be the same as the RADIUS Secret Key configured on the FortiPresence VM GUI (Portal > Portal Settings > Radius Clients). Click Apply and update the configuration parameters as required.
-
Configure the Project Secret Key to fortipresence for all FortiLAN Cloud setups.
Adding an SSID
After adding the RADIUS server, navigate to Wireless > Configuration > SSID to create an SSID, as described in Adding an SSID to a Network.
Notes:
-
Configure the Captive Portal as My Captive Portal and enter the Captive Portal URL, (Captive Portal URL copied from the FortiPresence VM GUI – Portal Management > Radius Configuration).
-
Set the Redirect URL to Specific URL and enter https://<FortiPresence Connect FQDN>/portal/success. The actual redirect option can be specified while creating the portal on FortiPresence VM GUI - Adding a New portal.
-
Enter the FQDN based exclusions in the Walled Garden list. A comma separated list with character limitation is supported.
-
Select My RADIUS Server and specify the RADIUS profile created earlier in this procedure as the Sign on Method.